Activity Stream

Bump...

Looks good

GL w/auction. Car looks very sharp. :thumbsup

Thanks everyone. Last night I was like "what's $2k in the grand scheme of things when the condition is this good?" but you guys are really keeping me...

That AW coupe looks very decent. For comparison, I bought my 2005 sedan with 137k miles on the clock. The only suspension work it had done at that...

95% of the time, "You will not find one cleaner than this, period!" is inadvertent coded language (to me) for, "I am overvaluing my mid-tier...

I guess my car is just a shitbox because the exterior/interior condition of that white ZHP looks excellent to me. However it would still be a hard...

Hahaaaa

I'm glad you agree the ZHP feels high. I just wanted to be "leveled" if I was out of play. I will do my best not to get emotional. Definitely ISO...

Bear in mind this is in Ontario - mine was some back and forth over email and phone. However I wouldn't state any mods or your claim could get...

Checked out a ZHP. I mean I hang out here a lot and it would be cool if I owned one, but it not a requirement in my hunt. Sorry if you're the owner...

Thanks for the closer picture. I 'll have to wait until I receive the camera to get a better of its size and how I might place it. AVIN camera...

It truly is a good time to be a seller. Unfortunate for buyers though. It was already hard to get in one of these under 60K miles and now it is...

It's that little nub to the right of the license plate, here's a closer pic: Wiring, damn it's been a while... I think my cam had 2 for power...

Thank you for your help. i try adjusting the bracket tomorrow.

Where exactly did yo place the camera? I cannot tell by the picture. I am assuming to placed it in the center. Which wires did you connect to? The...

I decided to leave the license plate lights in because it'd look asymmetric. Instead I drilled a hole in the trunk handle and mounted a cam there....

Should be the same as coupe. Just remove what you need to get your fingers and a ratchet in there.

Is bracket accessed differently for a 2005 ZHP convertible?

You can adjust the big bracket (#12) to align the bumper. You can reach it by just removing the turn signal on sedans. On coupes, you might need to...

It may be something that the previous owner did because the vehicle had had a front end collision. How can I close this gap?

There is no fastener for that location.

I went back to the same area to explore the Little River Canyon Parkway in the ///M235i Vert. I'll hang the 45second Relive clip, on the Facebook...

Here is a picture of the fastening location I am referring to in the faint yellow circle.

My bad, this was for the reader bumper. However, my coupe has a similar bracket for the front bumper as well.

OK in that case the screw I initially posted is the correct part. The trim cover does not connect to the fender. It does connect to the wheel well...

I think it's this bracket: ...

I am referring to the trim cover (#1) in the RealOEM.com picture.

Not sure what you mean since the actual bumper cover does not connect to the fender. Could you show a picture of what you are referring to?