PDA

View Full Version : Coding Section and General Chat



derbo
03-31-2014, 08:20 PM
What are your thoughts on a coding subforum??

Might be nice to have. Perhaps maybe keep it members only?

wertyu78
03-31-2014, 08:23 PM
I'm up for it completely.


Sent from my iPhone

Avetiso
03-31-2014, 08:32 PM
I'm down. I'll need it soon. Please make a thorough guide to set up all the software.

Sent from my SM-N900T using Tapatalk

johnrando
03-31-2014, 08:47 PM
Do it. Just open up a thread in the Mechanical/Troubleshooting section - it doesn't have to be it's own subforum.

Avetiso
03-31-2014, 08:51 PM
Do it. Just open up a thread in the Mechanical/Troubleshooting section - it doesn't have to be it's own subforum.

I think it might be a bit much for one thread because of all the different programs and methods, but I could be wrong.

Sent from my SM-N900T using Tapatalk

derbo
03-31-2014, 08:57 PM
JR,

you don't think Coding in itself should warrant a full subforum?


I know a few coding threads have been a bit scattered around the forum. ie LCM Coding, the MK60 LSD coding, DIY Speedo, Coolant. etc

johnrando
03-31-2014, 09:01 PM
I'm certainly willing to consider. I'm just not sure why there would be so many different topics underneath it. Let me look into it though. In the meantime, what would you consider the subtopics under that subforum? A single threaded THREAD wouldn't be enough to capture/find what you are looking for?

NorCalZman
03-31-2014, 09:21 PM
I think a sub forum for coding is an awesome idea. Topics within is a good question. Should it be broken down by the applications such as PA Soft, etc. or what?

Sent from my iPad using Tapatalk HD

derbo
03-31-2014, 10:11 PM
Maybe all we need is a consolidated thread with all the links to the coding threads.

QC_ZHP
03-31-2014, 10:12 PM
All for it. I just got the software on my spare laptop this weekend, ordering the cable this week. There seems to be a lot of scattered info around the web on all of this, it'd be nice to have detailed info, esp. w/ the work some of the guys can do on here.

johnrando
04-01-2014, 06:10 AM
We'll add the subforum and you guys pick the headers. I'm guessing some of them will be via the s/w type, etc? It will flush itself out.

cakM3
04-01-2014, 06:11 AM
I think this is a great idea as there are many of us who are interested in doing this :thumbsup

danewilson77
04-01-2014, 06:17 AM
Give admin some time to setup the roll out. He works full time as well :)

cakM3
04-01-2014, 06:30 AM
Give admin some time to setup the roll out. He works full time as well :)

no worries here Dane.....we know, all in good time! :)

wertyu78
04-01-2014, 07:36 AM
Subforum Headers

-WINKFP/DME Programming
-NCSEXPERT/Module Coding
-INPA/Diagnostics
-DIS/GT1 Diagnostics
-PROGMAN CodingProgramming
-Tuning/Tweaking (rev limiter, ignition timing, vanos timing, SES monitor delete, shift lights, etc etc)


Sent from my iPhone

derbo
04-01-2014, 08:13 AM
I think that might be too specific Wyatt.

I was thinking maybe two subforums:


-Diagnostics and Repair
-Programming/Coding

Since the amount of coding guys here is rather limited, I think we dont need that many subforums as these forums would be pretty empty..



A subforum wouldn't be necessary if someone is willing to moderate a coding thread and keep it clean with all the links to the threads with good information in it.

wertyu78
04-01-2014, 10:10 AM
I think that might be too specific Wyatt.

I was thinking maybe two subforums:


-Diagnostics and Repair
-Programming/Coding

Since the amount of coding guys here is rather limited, I think we dont need that many subforums as these forums would be pretty empty..



A subforum wouldn't be necessary if someone is willing to moderate a coding thread and keep it clean with all the links to the threads with good information in it.

This is true. Though I do believe a Subforum is necessary with the two headings you suggested. A thread with links would work well, but the Subforum would allow for growth.

Either way works for me and I'll be sure to contribute as much as I can. I'm sure others that have before, and others who haven't will do so as well.


Sent from my iPhone

derbo
04-01-2014, 10:46 AM
A sub-forum will definitely allow more freedom in terms of topics. The single thread is solely tied to one person and/or admin/mods. I think if this subforum exist, we may need a single READ First thread anyways to get the ball rolling. There is plenty of old topics scattered around this forum that could be gathered for coding.

danewilson77
04-01-2014, 11:21 AM
A sub-forum will definitely allow more freedom in terms of topics. The single thread is solely tied to one person and/or admin/mods. I think if this subforum exist, we may need a single READ First thread anyways to get the ball rolling. There is plenty of old topics scattered around this forum that could be gathered for coding.

Start a thread in Technical and start dumping links in there with desired categories.

Then when the subforum is established, all the hard work is done.

Sent from my SCH-I545 using Tapatalk

Imola.ZHP
04-05-2014, 11:49 AM
Awesome! It is easy to get discouraged and give up right now. I attempted to figure some stuff out a month or so ago, one thread links to another thread which links to another thread and its just a mess.

Thanks!

danewilson77
04-05-2014, 12:32 PM
Moved and renamed to "Coding Section and General Chat".

derbo
04-05-2014, 11:45 PM
Thanks boss!

sent from Moto X Dev Edition

Tnhl1989
04-08-2014, 05:56 PM
Just wanted to offer up BMW Scanner V1.4 / P.A. Soft to anyone who is interested in purchasing them. I have been ordering them in bulk and reselling them to the general public. Of course to family members there will be no mark up. I just want to give everyone the ability to clear their own codes and make quick changes to their own convenience. I have also quality control and soldered together two sets of pins in order to have them working 100%. Again the reason for this post and not in the for sale thread is so anyone can revisit this and look at it. If interested just PM me.

ELCID86
04-17-2014, 01:24 PM
Tony hooked my up with PA Soft and Scanner. This was very helpful in getting the SW to run on my Win7 Home Premium laptop.

http://forum.e46fanatics.com/showthread.php?t=942966

Now i need to learn how to code!

ELCID86
04-24-2014, 08:43 AM
Can you turn off the 37* warning beep with PASoft?
----
Got it (I think--need to wait until i hits 37* again--and it better not be this year!) = "Out. Temperature Warming"

Hornung418
04-24-2014, 08:49 AM
pls respond

I'm confused as to why my Laptop won't recognize my car when I attempt to load a profile with NCS Expert. VIN isn't being recognized by the software, but I don't have any tamper codes...I used the LCZ and the Kombi.

alexandre
04-24-2014, 08:55 AM
pls respond

I'm confused as to why my Laptop won't recognize my car when I attempt to load a profile with NCS Expert. VIN isn't being recognized by the software, but I don't have any tamper codes...I used the LCZ and the Kombi.

Is this on 328 or 330 ?

Hornung418
04-24-2014, 08:55 AM
The 330...

derbo
04-24-2014, 10:53 AM
pls respond

I'm confused as to why my Laptop won't recognize my car when I attempt to load a profile with NCS Expert. VIN isn't being recognized by the software, but I don't have any tamper codes...I used the LCZ and the Kombi.


Does INPA check out the Battery and Ignition is on when you plug in the OBD cable?

Hornung418
04-24-2014, 10:56 AM
Yes. I load INPA and minimize to the background. Then I load NCS Expert and try to load Revtor's Profile. Cannot verify VIN. Vin is faulty.

derbo
04-24-2014, 11:30 AM
I never had to load up INPA before NCSexpert. It's its own separate program.

Hornung418
04-24-2014, 11:32 AM
Okay, then yes, INPA checks the battery and ignition with Key on Engine off. It functions perfectly.

derbo
04-24-2014, 11:34 AM
Okay, then yes, INPA checks the battery and ignition with Key on Engine off. It functions perfectly.

I had issues with NCSexpert when DIS was running at the same time. Maybe try it without INPA loaded up?

Hornung418
04-24-2014, 11:35 AM
That's what caused the initial concern. running NCS with all other processes and functions closed, returned a VIN error. Saw that several people had success avoiding the error by opening INPA and then proceeding to load the file.

alexandre
04-24-2014, 12:05 PM
The 330...

Try the AKMB, that's what I use on mine. If your LCM isn't OE it throws random errors when you choose LSZ (in my experience at least).

Hornung418
04-24-2014, 12:20 PM
I chose all the available options. No luck.

Sent from my GS3.

Tnhl1989
04-24-2014, 01:01 PM
Edibas config is needed to be check. Change the parameters. I'm not in front of a computer to figure it out ATM.

AProudSailor
04-24-2014, 01:07 PM
Anyone in the San Diego area able to recode my 330CI to allow 'One-Touch Rear Quarter Windows'?

I've already made the hardware modifications, now just software remaining..

az3579
04-24-2014, 01:35 PM
Yes. I load INPA and minimize to the background. Then I load NCS Expert and try to load Revtor's Profile. Cannot verify VIN. Vin is faulty.

This is normal. You don't need the VIN section to work. Just acknowledge the message and move on, it should work.


Sent from my iPhone using Tapatalk

Hornung418
04-24-2014, 01:41 PM
Walk me through it this evening?

Sent from my GS3.

az3579
04-24-2014, 02:18 PM
Walk me through it this evening?

Sent from my GS3.

I can try my best but I am currently en route to Ontario, CA. Waiting for my connecting flight in Dallas.

I'll have to do it entirely off memory, but can help you out after 20:00 PST.


Sent from my iPhone using Tapatalk

Hornung418
04-24-2014, 02:20 PM
We will just wait do the meet then I will bring my laptop and we can troubleshoot.

Sent from my GS3.

TigerTater
04-27-2014, 11:46 AM
Does anyone know if it's possible to code out the secondary air pump?


Sent from my iPhone using Tapatalk

Avetiso
04-27-2014, 12:01 PM
Guys, anyone know how to code side markers on as running lights similar to corners?

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

Pip
04-27-2014, 12:07 PM
Guys, anyone know how to code side markers on as running lights similar to corners?

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

I think pa soft can do that but not sure. I did the corners off and DRL so I imagine it should be in those settings. If I get setup before you I'll check.

Avetiso
04-27-2014, 01:02 PM
I think pa soft can do that but not sure. I did the corners off and DRL so I imagine it should be in those settings. If I get setup before you I'll check.

Please do. I'd love that.

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

ELCID86
04-27-2014, 01:47 PM
Does anyone know if it's possible to code out the secondary air pump?


Sent from my iPhone using Tapatalk

Options:

13644

And I'd love an explanation of most of them!

Thumbs, iPhone, Tapatalk.

cakM3
04-27-2014, 01:59 PM
Guys, anyone know how to code side markers on as running lights similar to corners?

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

Dario, what I did was add LED lighting to have my side markers remain in the "on state" while driving. I don't think you can code these to stay on while driving...at least not from PA Soft...

derbo
04-27-2014, 03:05 PM
Guys, anyone know how to code side markers on as running lights similar to corners?

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

http://www.lindvigs.com/obioban/FSW_PSW.pdf

Might be these?

PWM_ANSTEUERUNG_SL_VO_LI Front left parking light plug. wert_01 / wert_02
PWM_ANSTEUERUNG_SL_VO_RE Front right parking light plug. wert_01 / wert_02

Avetiso
04-27-2014, 05:52 PM
http://www.lindvigs.com/obioban/FSW_PSW.pdf

Might be these?

PWM_ANSTEUERUNG_SL_VO_LI Front left parking light plug. wert_01 / wert_02
PWM_ANSTEUERUNG_SL_VO_RE Front right parking light plug. wert_01 / wert_02

Is this for ncs?

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

derbo
04-27-2014, 06:07 PM
Is this for ncs?

"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5

Yup. I don't really see anything that screams sidemarker. Most options say sidemarker which usually means the front or rear not the actual sides. But I don't think those will be it.

derbo
05-03-2014, 09:44 AM
Tony has got me interested in ISTA/D 3.41+ to run on the computer. It seems to run natively on Windows and do not require a VM like DIS. I am intrigued and looking into the necessary work to get it to work. So Far:

BMW Standard Tools 2.12
EDIABAS 7.xx (included with 2.12)
NCSExpert 4.01 (included with 2.12)
Rheingold ISTA/D 3.41

Currently I am researching how to get BMW standard tools to install properly and NCSexpert 4 to show up in English. Once those are done, I bet Rheingold will work perfectly fine. I will start researching now. I think ISTA/D should be much faster than DIS and it should be fun! :)


Tony...you should make a DIY ;)

Tnhl1989
05-03-2014, 11:04 AM
If I have time which seems to not be the case lately. :p

Was hoping terra could upload the files needed but I haven't heard from him in a while.

derbo
05-03-2014, 11:10 AM
Tony,

This thread might help with the search if you feel like looking instead of waiting on Terra.

http://www.e90post.com/forums/showthread.php?t=918608

Tnhl1989
05-03-2014, 11:22 AM
I already look at all of them :p

derbo
05-03-2014, 12:34 PM
I already look at all of them :p

Okay. :) Since I already have INPA 5.02 installed and running, I'm going to setup for 5.06 and keep english :)


Also found 3.42.40 Rheingold.. :)

Edit:

BMW Standard Tools 2.12 is installed with NCSexpert set to English and using INPA 5.02 scripts instead of the german ones 5.06.

Next up Install Rheingold 3.42 when its done downloading.

I don't have my car on me till Monday so I am unable to test it till then. Hopefully it works!! :D

derbo
05-03-2014, 08:51 PM
http://i.imgur.com/FKhM5fj.png

Almost there!

Tnhl1989
05-04-2014, 11:30 PM
Set up edibas on ista and it'll work fine ;)

derbo
05-05-2014, 07:26 AM
Set up edibas on ista and it'll work fine ;)


Yea ISTA is set to use EDIABAS.ini. I set the port to 6801 on the Ediabas.ini. Anything else needed? I'll check tonight when I have access to the BMW.

Tnhl1989
05-05-2014, 04:01 PM
Here is the Edibas file that is working on my side.

https://www.dropbox.com/s/49tif99ml7yqp02/EDIABAS.INI

derbo
05-05-2014, 04:14 PM
here is the difference between yours and mine.

http://www.diffnow.com/?report=qrlho

derbo
05-05-2014, 06:41 PM
http://i.imgur.com/IfwKwll.png

http://i.imgur.com/XRk9Zfx.png

yay

derbo
05-08-2014, 04:46 PM
PA SOFT Owners:

Did anyone need to solder their pins on their PA Soft or know how to look for if it is required to solder? I've been having trouble with my PAsoft and I was wondering if this may be a solution.

Avetiso
05-08-2014, 04:54 PM
Fancy ISTA.

Tnhl1989
05-08-2014, 05:08 PM
PA SOFT Owners:

Did anyone need to solder their pins on their PA Soft or know how to look for if it is required to solder? I've been having trouble with my PAsoft and I was wondering if this may be a solution.

http://forum.e46fanatics.com/showthread.php?t=1020376&highlight=

derbo
05-08-2014, 05:10 PM
Thanks Tony.


My PA soft can read with another laptop but I'm not sure if a DME was able to be read.

derbo
05-08-2014, 07:55 PM
13862

13863

Soldered as per tony suggestion for pin 1/2 as well.

I don't have my car on me, so hopefully lets see this work tomorrow!

sent from Moto X Dev Edition

derbo
05-09-2014, 01:20 PM
Yea I'm stumped. I can't read the IKE or LCM with it either. It just says Hardware not ready even though PA Soft shows up as the hardware being ready in the settings. I have a hunch I have a hardware issue with the rMBP as my macbook air seems to be able to communicate fine.

Avetiso
05-11-2014, 07:09 PM
Hola, coders.

M3 instrument cluster with 205k miles. Can I code it to be functional with my car and revert the mileage down? Found one for cheap.

Looking for full functionality. I know Meric had this going, but he's... no longer with us.

derbo
05-11-2014, 09:04 PM
Hola, coders.

M3 instrument cluster with 205k miles. Can I code it to be functional with my car and revert the mileage down? Found one for cheap.

Looking for full functionality. I know Meric had this going, but he's... no longer with us.



There is a good amount to do to get it to remove the tamper dot. You will need to program a EEPROM chip for it and solder it back on the cluster.

QC_ZHP
05-12-2014, 11:47 AM
I thought I remember someone on here pulling it off? It was a while ago

derbo
05-12-2014, 02:08 PM
I thought I remember someone on here pulling it off? It was a while ago

I think that is Meric.

QC_ZHP
05-20-2014, 12:17 PM
I think that is Meric.

Coding nightmare?

derbo
05-20-2014, 01:24 PM
Coding nightmare?

From what I have gathered, its not that big of a headache.

The Cluster itself stores the VIN and mileage on a M35080 chip. This chip is non-writable and have to be desoldered and reprogrammed with a R270 programmer or similar. Speedometer diamater and coolant temperature ranges will also need to be calibrated to non-M spec. The DSC lights may need reprogramming to Non-M as well. The Oil Temp should work fine on the latest updated non-M DMEs though!

This still doesn't stop the fact that the redline is 8000rpm and no one has figured out how to enable the warm lights to stop at a desired "redline."


Originally I was planning to do it, but watching this video below, I can't stand seeing the redline at 8000rpm...I guess I could crack open the cluster anyways and put something there to acknowledge the 6800rpm redline?




http://www.youtube.com/watch?v=rerL18XAZko

Tnhl1989
05-20-2014, 06:15 PM
Hey Derek! I could get you a S54 so that the cluster isn't a problem ;)

derbo
05-20-2014, 08:02 PM
Hey Derek! I could get you a S54 so that the cluster isn't a problem ;)


:facepalm

Avetiso
05-20-2014, 08:30 PM
:facepalm

That sounds like a much better solution to me. :dunno

Sent from my SM-G900T using Tapatalk

QC_ZHP
05-20-2014, 08:39 PM
I concur

derbo
05-20-2014, 08:56 PM
That's why I haven't done it. ;P

terraphantm
05-22-2014, 08:56 PM
From what I have gathered, its not that big of a headache.

The Cluster itself stores the VIN and mileage on a M35080 chip. This chip is non-writable and have to be desoldered and reprogrammed with a R270 programmer or similar. Speedometer diamater and coolant temperature ranges will also need to be calibrated to non-M spec. The DSC lights may need reprogramming to Non-M as well. The Oil Temp should work fine on the latest updated non-M DMEs though!

This still doesn't stop the fact that the redline is 8000rpm and no one has figured out how to enable the warm lights to stop at a desired "redline."


Originally I was planning to do it, but watching this video below, I can't stand seeing the redline at 8000rpm...I guess I could crack open the cluster anyways and put something there to acknowledge the 6800rpm redline?




http://www.youtube.com/watch?v=rerL18XAZko

The reason no one has figured out the RPM lights is because the LEDs are "dumb"; the cluster doesn't control any real logic for those lights. Instead, the MSS54 sends a signal to the cluster that dictates how many lights are enabled. If you can figure out what the CAN message looks like, you may be able to replicate a message that constantly keeps the 6500 and 7000RPM LEDs on.

derbo
05-22-2014, 09:11 PM
The reason no one has figured out the RPM lights is because the LEDs are "dumb"; the cluster doesn't control any real logic for those lights. Instead, the MSS54 sends a signal to the cluster that dictates how many lights are enabled. If you can figure out what the CAN message looks like, you may be able to replicate a message that constantly keeps the 6500 and 7000RPM LEDs on.


Yea I was reading about that Terra. I think my solution is putting a S54 in my ZHP.

Tnhl1989
05-23-2014, 03:42 AM
Drive over here Derek ;)

Hornung418
05-23-2014, 03:24 PM
Aren't those lights Oil Temp related? I know there's a gauge right below the Tach, but when the amber is gone, the car is ready to be flogged...

derbo
05-23-2014, 04:11 PM
Aren't those lights Oil Temp related? I know there's a gauge right below the Tach, but when the amber is gone, the car is ready to be flogged...

Yes. Like Terra mentioned no one has figured out the CAN message that the S54 sends to tell the cluster how many lights to turn on.

Hornung418
05-23-2014, 04:29 PM
Couldn't you just code the oil temp gauge to stay at the appropriate range? I known it not OEM...but maybe just powering the LEDs on manually?

Sent from my GS3.

derbo
05-24-2014, 09:48 AM
Couldn't you just code the oil temp gauge to stay at the appropriate range? I known it not OEM...but maybe just powering the LEDs on manually?

Sent from my GS3.

I don't know. I would want a functional Oil Temp Gauge too.. The LEDs turning on manually, might be idea. I don't know how much work involve to get that to work, but it is possible.


Sent from my iPad

ELCID86
05-24-2014, 10:08 AM
Got my son's GOlf TDI coded today by a nice guy that lives nearby. It's contagious!

terraphantm
05-24-2014, 12:10 PM
Couldn't you just code the oil temp gauge to stay at the appropriate range? I known it not OEM...but maybe just powering the LEDs on manually?

Sent from my GS3.

The lights are oil temp related, but it has nothing to do with the gauge itself. All the logic is handled on the DME. You can manipulate the gauge all you want, but the lights won't work without the appropriate signal from the DME.

You can hardwire the LEDs with a little soldering

Hornung418
05-24-2014, 12:12 PM
The hard wiring seems like the easiest option...

Sent from my GS3.

mindspin311
05-28-2014, 07:59 AM
Anyone in the Atlanta area?

ELCID86
05-28-2014, 08:02 AM
Anyone in the Atlanta area?

Run up to the BBQ in VA this weekend! You and your car need some more alone-time anyway. :-D

mindspin311
05-28-2014, 09:00 AM
Ha, that is a bit far.

Sent from my Nexus 5

AProudSailor
05-28-2014, 12:33 PM
Anyone coding in the San Diego area?

toddness
06-01-2014, 08:40 AM
This looks like a great OBD II on Iphone scanner option - love to hear some thoughts...

https://www.automatic.com/

Tampa330i
06-02-2014, 04:52 AM
This looks like a great OBD II on Iphone scanner option - love to hear some thoughts...

https://www.automatic.com/

This is an interesting concept. I didn't know there was such a thing as a BT obd2 adapter.
After searching around a little, I see there are much cheaper versions of basically the same thing minus the app and those specific features Automatic has. I might pick one of these generic adapters up for $10 and this app for $5 and give it a try:

http://www.youtube.com/watch?v=Q_A7u1SqddI&feature=youtu.be

Washburn
06-08-2014, 09:44 AM
That Automatic app can't show data like engine/coolant temp., etc, right ?

Washburn
06-08-2014, 10:16 AM
This looks like a great OBD II on Iphone scanner option - love to hear some thoughts...

https://www.automatic.com/

Nice that it's BT, but for $40 less, and a bit more bulky and wired, ultragauge can provide detailed real time engine data such as coolant temp, etc (with alarms !) , in addition to what Automatic app/dongle does (minus the crash alert thing, which IS nice), and it doesn't tie up your iphone in anyway, which I personally prefer. And the Ultragauge has a real display, and you don't have to look at your phone screen, which can be left alone for its main intended functions.
http://www.ultra-gauge.com/ultragauge/

Tampa330i
06-09-2014, 08:16 PM
Messed around with Torque Pro and a 9$ ebay bluetooth obd2 adapter, very cool gadget for a total of $14:

http://www.youtube.com/watch?v=A9H7UxE7cUY

And this is the track recorder plugin recording a short drive:

http://www.youtube.com/watch?v=XAC6CUC1yHI

johnrando
06-09-2014, 08:39 PM
Tell me more about the track recorder plug-in?

Tampa330i
06-09-2014, 09:11 PM
Tell me more about the track recorder plug-in?

It's like a combination of the car and phone inputs and a video recording from the phone. It's as customizable as torque itself, so you can put whatever gauges around the screen you want. I don't show it in the video, but there is also the option to have a map overlayed and your gps position shown on the map. I deleted the audio, but it does use the phone's mic to record as well.
I imagine this would be a really great thing to have when tracking down a specific problem while driving. I could simply record a drive and catch the problem visually with sensor data and share it with anyone as if they were sitting there watching my gauges. You can really see how the coolant temp fluctuates depending on what you're doing!

johnrando
06-10-2014, 09:17 AM
Thanks. So, it's a Torque plug-in? Free or fee?

derbo
06-10-2014, 10:12 AM
https://play.google.com/store/apps/details?id=org.prowl.torque

Rando, 5 bucks.

Tampa330i
06-10-2014, 03:46 PM
There is a torque lite app, which is free, but I don't think you can install plugins. The Torque Pro app is $5 and you can install plugins made by anyone. The track recorder plugin is made by the same guy who made Torque and it's free. Here's a list of the plugins with links to the play store: http://torque-bhp.com/wiki/Plugins

Torque lite: https://play.google.com/store/apps/details?id=org.prowl.torquefree
Torque Pro: https://play.google.com/store/apps/details?id=org.prowl.torque
Track Recorder: https://play.google.com/store/apps/details?id=org.prowl.recorder

NorCalZman
07-29-2014, 06:22 PM
I saw this on another forum. It seemed to be for e46s but I am not sure what program this is from. If it can get rid of the legal page on my nav screen I really want to do this! Anyone know?

Module: GT
Field: LAENDERVARIANTE_GT
Value: ece
Purpose: Remove the annoying legal "accept" screen on nav start up.

derbo
07-30-2014, 07:27 AM
I saw this on another forum. It seemed to be for e46s but I am not sure what program this is from. If it can get rid of the legal page on my nav screen I really want to do this! Anyone know?

Module: GT
Field: LAENDERVARIANTE_GT
Value: ece
Purpose: Remove the annoying legal "accept" screen on nav start up.

Ncsexpert would be the right program to do this.

sent from Moto X Dev Edition

NorCalZman
07-30-2014, 10:14 AM
I have yet to try this application. Darn. Better start reading up.

derbo
07-30-2014, 03:27 PM
I have yet to try this application. Darn. Better start reading up.

It's very powerful and also very dangerous if used wrong :)

ELCID86
08-23-2014, 11:29 AM
Is there a setting in PA Soft for the driver's side window to auto-down after a double click on the key fob (to unlock)? I may have accidentally set this. It starts to roll down when I open the door after a double-tap then goes back up when the door is closed. Or do I have a ghost??

danewilson77
08-23-2014, 01:12 PM
Is there a setting in PA Soft for the driver's side window to auto-down after a double click on the key fob (to unlock)? I may have accidentally set this. It starts to roll down when I open the door after a double-tap then goes back up when the door is closed. Or do I have a ghost??
This happens on mine as well.

The friendliest forum on the planet!

ELCID86
08-23-2014, 02:15 PM
This happens on mine as well.

The friendliest forum on the planet!

I guess I'm glad it's not just me :dunno
Known issue or erroneous coding? Anyone know a fix? (Or just be careful to only unlock once?? I can see this being an issue with a window covered with snow or ice...


Thumbs, iPhone, Tapatalk.

terraphantm
08-24-2014, 06:09 AM
There is a setting, but I'm not sure what it would be called in PASoft. Normally it's only meant as an optional feature for coupes (helps open the door in tight quarters)

terraphantm
08-24-2014, 06:11 AM
It's very powerful and also very dangerous if used wrong :)

IMO it's less dangerous than PASoft. NCS can reset any module to its defaults. PASoft can't.

ELCID86
08-24-2014, 06:19 AM
There is a setting, but I'm not sure what it would be called in PASoft. Normally it's only meant as an optional feature for coupes (helps open the door in tight quarters)

I'll have to play around with some of the settings in PA soft. If anybody else knows which one it is please let me know.


Thumbs, iPhone, Tapatalk.

az3579
08-25-2014, 05:45 AM
I'll have to play around with some of the settings in PA soft. If anybody else knows which one it is please let me know.


Thumbs, iPhone, Tapatalk.

For weird anomalies, I tend to just reset a module to factory defaults with NCS Expert using Expert Mode and recode the desired features afterwards with the custom profile. Always works like a charm.

ELCID86
08-25-2014, 05:47 AM
For weird anomalies, I tend to just reset a module to factory defaults with NCS Expert using Expert Mode and recode the desired features afterwards with the custom profile. Always works like a charm.

Not a bad idea. When are you coming down?! :-)

az3579
08-25-2014, 05:49 AM
Not a bad idea. When are you coming down?! :-)

When I'm not limited on travel. :p

derbo
08-25-2014, 07:16 AM
For weird anomalies, I tend to just reset a module to factory defaults with NCS Expert using Expert Mode and recode the desired features afterwards with the custom profile. Always works like a charm.

I agree with reseting the module with an empty MAN file. I keep a list of my settings on google drive for this very reason.

ELCID86
08-25-2014, 11:00 AM
I agree with reseting the module with an empty MAN file. I keep a list of my settings on google drive for this very reason.
Can't do this with PA Soft?

derbo
08-25-2014, 12:18 PM
Can't do this with PA Soft?

I'm not sure if this is possible. The way NCSexpert does it, it refers to the DATEN files to revert back to default settings from the factory.

Lanister
08-25-2014, 12:25 PM
I concur

az3579
08-25-2014, 12:44 PM
Can't do this with PA Soft?

Nope.

ELCID86
09-04-2015, 05:39 AM
Anyone have PASoft running on Win10?


Thumbs, iPhone, TaT.

slater
09-04-2015, 06:28 AM
Anyone have PASoft running on Win10?


Thumbs, iPhone, TaT.

i would also like to know. i never got it running under Windows 7/8/8.1 x64, but never really spent a ton of time on it - the USB drivers installed but then PASoft never recognized them.

i have an old IBM ThinkPad T43 laptop (running XP) that i use for PASoft. it's 10 years old but sadly has better battery life (2hrs on an old 9-cell battery) than my 5-year old lenovo T410 (now running Windows 10 - on battery it lasts about 30min, despite several battery 'restore' procedures).

peter

ELCID86
09-04-2015, 09:47 AM
i would also like to know. i never got it running under Windows 7/8/8.1 x64, but never really spent a ton of time on it - the USB drivers installed but then PASoft never recognized them.

i have an old IBM ThinkPad T43 laptop (running XP) that i use for PASoft. it's 10 years old but sadly has better battery life (2hrs on an old 9-cell battery) than my 5-year old lenovo T410 (now running Windows 10 - on battery it lasts about 30min, despite several battery 'restore' procedures).

peter

Wow. That does stink about the newer computer.


Thumbs, iPhone, TaT.

ELCID86
01-17-2016, 01:23 PM
Anyone have PASoft running on Win10?


Thumbs, iPhone, TaT.

Bump.

ELCID86
01-17-2016, 01:46 PM
This worked like a champ. (post #1).

az3579
01-17-2016, 02:18 PM
Anyone have PASoft running on Win10?


Thumbs, iPhone, TaT.

I do...

ELCID86
01-17-2016, 02:22 PM
I do...

Thanks for the confirmation. I do to now! For some reason I still can't read my DME module though.


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46fanatic

jfh342
01-25-2016, 03:08 PM
Just wanted to offer up BMW Scanner V1.4 / P.A. Soft to anyone who is interested in purchasing them. I have been ordering them in bulk and reselling them to the general public. Of course to family members there will be no mark up. I just want to give everyone the ability to clear their own codes and make quick changes to their own convenience. I have also quality control and soldered together two sets of pins in order to have them working 100%. Again the reason for this post and not in the for sale thread is so anyone can revisit this and look at it. If interested just PM me.

Tony,
PM sent. Payment sent. Pls check your PMs and confirm receipt.
Thanks,
John