PDA

View Full Version : Fog light wiring?



bloodspatteranalyst
04-20-2014, 08:04 PM
Hey all

The right fog light on my car is missing (from the PO). I looked at the "socket" where the fog light was supposed to be and didn't see a wiring harness anywhere, which is weird. The car was hit in the right wheel well in the past, which could explain why the fog light is no longer there.

If I got a new foglight with wiring, how would I go about wiring it? I don't need to retrofit the switch or anything; my right fog light is working just fine. I've done some research, but most DIYs are for retrofitting.

Any help appreciated.

Avetiso
04-20-2014, 08:10 PM
The wires probably tore behind the tape that wraps most of the wiring harness on the side of the engine bay. Start taking that tape apart and I'm sure you will find the place where the wires tore. Solder them up and you will be golden.

Hermes
04-20-2014, 08:35 PM
take off your bumper, it will be back there somewhere

ELCID86
04-21-2014, 03:51 AM
I'd feel around in there first. Maybe it's taped to the side of something.


Thumbs, iPhone, Tapatalk.