PDA

View Full Version : zhp control arms



Xcessive46
06-27-2014, 11:11 AM
I've read that the ball joints are different on the ZHP (solid metal) but is there any difference in the shape or geometry of the control arm itself. Or in other words, can i use the Meyle HD replacement if my ball joints are bad on the original? Thanks in advance.

Avetiso
06-27-2014, 11:25 AM
ZHP ball joints are stiffer, but the geometry is the same, I believe.

Highly recommend OEM replacements designed for the ZHP.

ELCID86
06-27-2014, 11:57 AM
I wasn't impressed the the Meyles I bought a few years back. Others here have had better luck I think. I wouldn't use them though.


Thumbs, iPhone, Tapatalk.

mindspin311
06-27-2014, 12:35 PM
So, if control arms are needed, go with OEM ZHP?

Avetiso
06-27-2014, 12:39 PM
So, if control arms are needed, go with OEM ZHP?
Yup. I think it's like $400-$500 for a pair.

Hornung418
06-27-2014, 12:43 PM
I paid $404 for my new pair. RM European has some good prices. I used OEMBimmerparts.com

Sent from my GS3.

Newjack
06-27-2014, 07:48 PM
I paid $404 for my new pair. RM European has some good prices. I used OEMBimmerparts.com

Sent from my GS3.

Can confirm. Justin is lying though its $407 even. I just checked my receipt from 5/21/13 when I bought mine.

Don't get meyle.

Avetiso
06-27-2014, 08:23 PM
Can confirm. Justin is lying though its $407 even. I just checked my receipt from 5/21/13 when I bought mine.

Don't get meyle.
Wow, what a jerk. $404 is one with, but $407... how inconsiderate.

Hornung418
06-28-2014, 04:43 AM
Lol!

Whatever...

Sent from my GS3.

az3579
06-30-2014, 03:54 AM
I've read that the ball joints are different on the ZHP (solid metal) but is there any difference in the shape or geometry of the control arm itself. Or in other words, can i use the Meyle HD replacement if my ball joints are bad on the original? Thanks in advance.

Meyle HD's are total garbage. My Meyle HD control arms completely failed after only 1 year, about 30k miles. I missed a track event because on the way to the track, the control arm's ball joint broke, so I replaced with the HD's. A year later, the SAME event (October), it failed again, only this time before the track. I was so pissed.