PDA

View Full Version : What can i get away with as far as spacers



Dtownwolfpack
08-13-2014, 11:37 AM
Hi guys, newbie here. I have a zhp that had the wheel hubs converted from bolt ons to lugs and was wondering how wide of a spacer i can get away with. The wheels are sport edition km11 and has an offset of 40. They're 18x8's all the way around. Any ideas would be helpful.

Thanks guys!

Dtownwolfpack

Smilez
08-13-2014, 11:50 AM
Welcome,

You should measure the distance to the fender from the wheel and go from there.

stephenkirsh
08-20-2014, 09:44 AM
We have a spacer swap thread you could check out, too.

TWong1200
08-20-2014, 10:11 AM
I think he's asking how much of a spacer he could mount on this stud-converted car. He's no longer using bolts and is using studs.

OP, it depends on the length of the studs you're using.

derbo
08-20-2014, 11:26 AM
How long are your studs?

75mm studs has a maximum recommended spacer of 12.5mm.