View Full Version : What can i get away with as far as spacers

08-13-2014, 11:37 AM
Hi guys, newbie here. I have a zhp that had the wheel hubs converted from bolt ons to lugs and was wondering how wide of a spacer i can get away with. The wheels are sport edition km11 and has an offset of 40. They're 18x8's all the way around. Any ideas would be helpful.

Thanks guys!


08-13-2014, 11:50 AM

You should measure the distance to the fender from the wheel and go from there.

08-20-2014, 09:44 AM
We have a spacer swap thread you could check out, too.

08-20-2014, 10:11 AM
I think he's asking how much of a spacer he could mount on this stud-converted car. He's no longer using bolts and is using studs.

OP, it depends on the length of the studs you're using.

08-20-2014, 11:26 AM
How long are your studs?

75mm studs has a maximum recommended spacer of 12.5mm.