PDA

View Full Version : Anyone have the E60 BMW M135 wheels on their BMW 330 ZHP?



Kootroc
02-28-2011, 12:45 PM
Just wondering if anyone has pictures of the E60 M135 style wheels on their ZHP.
I like the concavity of the ET20 offsets and I'm curious how they would look.

mimalmo
02-28-2011, 12:52 PM
I thought that the M135's that were available for the E60 were ET20?

Kootroc
02-28-2011, 12:56 PM
Corrected.

Any pics? =D

mikeyb74
02-28-2011, 12:57 PM
I thought that the M135's that were available for the E60 were ET20?

They are ET20.

Marcus-SanDiego
02-28-2011, 01:06 PM
Koot, I'd like to see that too. The offset for the fronts is 20ET (aggressive) while the rears are ET43. You'll be pulling fenders -- at a minimum -- no? And those were 18x8 wheels, right?

I'd like to see some pictures too -- of them on a 330 ZHP.

EDIT: the wheels are 20ET all around. There would have to be some serious work done to make those fit.

mikeyb74
02-28-2011, 01:15 PM
Koot, I'd like to see that too. The offset for the fronts is 20ET (aggressive) while the rears are ET43. You'll be pulling fenders -- at a minimum -- no? And those were 18x8 wheels, right?

I'd like to see some pictures too -- of them on a 330 ZHP.

Marcus according to ETK both the front and rear are ET20s.

jvr826
02-28-2011, 01:23 PM
Way too aggressive for a non-M E46 and I'd bet a dollar the center bore on the E60 wheels is also different.

Crickett
02-28-2011, 01:25 PM
A guy on E46F unknowingly bought a set (http://forum.e46fanatics.com/showthread.php?t=808970) & someone referenced this BMW wheel database site (http://felgenkatalog.auto-treff.com) which lists them as 18"x8" with the fronts being ET20 & rears being ET43. FWIW.

EDIT: And then after I actually finished reading the thread (:facepalm) the owner measured each wheel & discovered they were all the same offset. Pics of the inner hub surface appear to confirm four identical 18"x8" ET20 wheels.

mikeyb74
02-28-2011, 01:26 PM
I've seen alot of non M e46s with e60 and e63/64 wheels. I bet they have alot of rubbing issues.

mikeyb74
02-28-2011, 01:28 PM
A guy on E46F unknowingly bought a set (http://forum.e46fanatics.com/showthread.php?t=808970) & someone referenced this BMW wheel database site (http://felgenkatalog.auto-treff.com) which lists them as 18"x8" with the fronts being ET20 & rears being ET43. FWIW.

Looking on Realoem it states ET20 front and rear.

http://www.realoem.com/bmw/showparts.do?model=NB53&mospid=48806&btnr=36_0813&hg=36&fg=15

Kootroc
02-28-2011, 01:33 PM
I've seen alot of non M e46s with e60 and e63/64 wheels. I bet they have alot of rubbing issues.

According to the Wheel Offset Calculator the E60 wheels would only extend 24mm over the stock ZHP rear wheels. Would this produce a rubbing issue?

danewilson77
02-28-2011, 01:37 PM
I think ET 42 would be fine. ET 20.....thumbs down.....especially lowered.

Marcus-SanDiego
02-28-2011, 02:00 PM
Marcus according to ETK both the front and rear are ET20s.

Thanks. I have edited the post accordingly. Thanks, guys.