PDA

View Full Version : Matching fog color to xenon



dyintorace
11-09-2014, 05:52 PM
Now that I have my headlights sorted out, I'd like to replace the fog light bulbs to match the xenon color. From research, I've seen Hoen xenonmatch bulbs mentioned frequently. Are those the best bet? Better options?

az3579
11-09-2014, 06:11 PM
Just get one that's the same temp as your Xenon bulb. That should do the trick, but only if your fogs are HID. If they're not HID then it's a moot point as it won't quite match no matter what you do.

Factory Xenon bulbs are 4300k in temperature.

Avetiso
11-10-2014, 12:03 AM
Get the same bulbs as your headlights if you want a near perfect match. May be some subtle difference because of the ballast.

dyintorace
11-10-2014, 05:35 AM
I don't have HID fogs and wasn't planning on that upgrade. My last ZHP had bulbs that pretty closely matched the factory HID temperature. I think they were Hoens, but came with the car.

ELCID86
08-09-2015, 04:20 PM
Bumpin and oldie. So 4300 is close to the color of our Xenon low beams? I"m not sure what's in my car by I need new HID bulbs. I was leaning towards 5k or even 6k, but I don't want to be too blue...

az3579
08-09-2015, 05:07 PM
Bumpin and oldie. So 4300 is close to the color of our Xenon low beams? I"m not sure what's in my car by I need new HID bulbs. I was leaning towards 5k or even 6k, but I don't want to be too blue...
Factory temp is 4300k. 5000k is the whitest output you can get, with a very slight tinge of blue.

sent from my Droid Turbo

ELCID86
08-10-2015, 04:15 PM
Factory temp is 4300k. 5000k is the whitest output you can get, with a very slight tinge of blue.

sent from my Droid Turbo

Thanks. I'm thinking of going 5k.


Thumbs, iPhone, TaT.

cakM3
08-10-2015, 04:27 PM
Factory temp is 4300k. 5000k is the whitest output you can get, with a very slight tinge of blue.

sent from my Droid Turbo

Actually 5000k is whitest output but with a very slight yellow, not blue. 6000k is the white with a slight tinge of blue. Just wanted to post this correction. if you have to have the absolute perfect match between fogs and your Xenons, then it is easiest to get the fog HID kit with matching 9006/D2S bulbs. :thumbsup

Shawn, 5000k will provide the whitest look without any tinge of blue if that's what you're going for :thumbsup

Here are a few charts for reference...
https://farm1.staticflickr.com/398/19849538094_e8e900486e_o.png

https://farm1.staticflickr.com/437/20284071190_218494ec35_o.jpg

https://farm1.staticflickr.com/384/20472176625_b1217b9afe_o.png

ELCID86
08-10-2015, 04:46 PM
Thanks Charlie. I wish I knew what the PO had installed as I like the color. DDM bulbs the best route? (Even with @$12 s/h?)


Thumbs, iPhone, TaT.

cakM3
08-10-2015, 04:48 PM
Thanks Charlie. I wish I knew what the PO had installed as I like the color. DDM bulbs the best route? (Even with @$12 s/h?)


Thumbs, iPhone, TaT.

To be honest DDM bulbs are cheap but they work. I have been using DDM bulbs for years and have not had any issues from my experience. For the price you just can't beat them :thumbsup

ELCID86
08-10-2015, 05:21 PM
Thanks. Just ordered a set.


Thumbs, iPhone, TaT.

az3579
08-10-2015, 06:08 PM
Dunno Charlie, 6k looks really blue to me, and is why I went back to 4300k when I tried the 6k's you gave me.


Actually 5000k is whitest output but with a very slight yellow, not blue. 6000k is the white with a slight tinge of blue. Just wanted to post this correction. if you have to have the absolute perfect match between fogs and your Xenons, then it is easiest to get the fog HID kit with matching 9006/D2S bulbs. :thumbsup

Shawn, 5000k will provide the whitest look without any tinge of blue if that's what you're going for :thumbsup

Here are a few charts for reference...
https://farm1.staticflickr.com/398/19849538094_e8e900486e_o.png

https://farm1.staticflickr.com/437/20284071190_218494ec35_o.jpg

https://farm1.staticflickr.com/384/20472176625_b1217b9afe_o.png

cakM3
08-18-2015, 04:48 AM
Dunno Charlie, 6k looks really blue to me, and is why I went back to 4300k when I tried the 6k's you gave me.

Then you want the 5000k bulbs.... I kinda like my 6000k bulbs....

ELCID86
08-18-2015, 05:59 AM
I went 5k. I'll let you know when I get them n


Thumbs, iPhone, TaT.

cakM3
08-18-2015, 08:12 AM
I have a set of 5000k bulbs. Juat haven't gotten off my butt to install them just yet


Sent from my iPhone5S using Tapatalk

WOLFN8TR
08-18-2015, 09:41 AM
I have a set of 5000k bulbs. Juat haven't gotten off my butt to install them just yet.

EHT. [emoji2]

I have 4300K and they do not match perfectly. I would say the 5000K's would look better.

ELCID86
08-23-2015, 05:05 AM
I installed the 5k DDM bulbs. They may be a bit bluer than I wanted but they are bright and I'm glad I didn't go any higher.

I tried to catch them during different parts of the day No post processing of these JPGs. (Highlights are a tad blown).

21205

21206

21207

21208

21209


Thumbs, iPhone, TaT.

WOLFN8TR
08-23-2015, 01:21 PM
Looks good. The daytime photos it looks like a perfect match. You can see the blue tint in the night photos. Still looks good IMO.

cakM3
08-23-2015, 02:07 PM
Shawn, I like how the 5000k's look....more like a white output compared to the look of your fogs.... it almost looks like your fogs are 6000k's. I agree with Gary, still looks good :thumbsup

Johnmadd
08-23-2015, 02:15 PM
Shawn, I like how the 5000k's look....more like a white output compared to the look of your fogs.... it almost looks like your fogs are 6000k's. I agree with Gary, still looks good :thumbsup

I like them. Charlie, the output on the ground is only slightly blue at the part closest to the lights and the out put is similar to office lighting. I have 5000 in my e30 headlights and it has a similar blue tint when you look at them but the output is completely white from behind the steering wheel.

ELCID86
08-23-2015, 02:22 PM
Thanks guys. I think I'll keep em


Thumbs, iPhone, TaT.

Rovert
08-23-2015, 06:49 PM
Rule of thumb is most HID bulbs within a reflector housing will "appear" one to two color temps higher than the color temp that is in your projector. I don't know the exact reason but I think it's to do with light color refraction and distance traveled to the outside of a curved projector versus a reflector that immediately throws the light out everywhere without any true focusing.

I know in my car I have 5000K-5500K bulbs in my headlight projectors and older 6000K in my reflector fogs. That makes my fogs look a little more blue/purple than the headlights. If I were to go it all again I'd install 4300K-5000K in the fogs to match my higher temp headlight bulbs. My parents have 4300K in their minivan reflectors which were very close to 6000K Ultinons from my old ZHP projectors.

Whammy
08-24-2015, 06:20 AM
Shawn, which DDM bulb did you purchase?

ELCID86
08-24-2015, 02:39 PM
Shawn, which DDM bulb did you purchase?

The 9006, 5000k per Charlie's recommendation. They come from China so expect to wait 7-10 days.

Get the 35w kit if you don't have ballasts.


Thumbs, iPhone, TaT.

cakM3
08-24-2015, 02:57 PM
I like the look :thumbsup

ELCID86
08-25-2015, 03:35 PM
I like the look :thumbsup

Thanks for the recommendation.


Thumbs, iPhone, TaT.