PDA

View Full Version : Rear License Plate Screw Size



quikryptonite
03-17-2011, 08:42 PM
I got a standard pack of license plate screws from AutoZone this morning and they worked fine for the front, but they don't fit in the back. Does anyone know what the correct size of screw should be used.

I have seen some people online saying that it is an M5 x .8. I think the size I bought were 3/4 #14 and they were too long and I am not sure if the thread was correct either.

TIA

MrMaico
03-18-2011, 03:30 AM
It looks like it's #12 here which is the 5X8 MM.

http://www.realoem.com/bmw/showparts.do?model=EV53&mospid=47725&btnr=41_1367&hg=41&fg=60

mikeyb74
03-18-2011, 05:29 AM
I ended up going with the BMW screws. Part number 07 11 9 907 623.

http://www.bavauto.com/assets/imglib500/07119907623.jpg

quikryptonite
03-18-2011, 10:03 AM
Thank you, that is a fabulous website. I appreciate it.

az3579
03-18-2011, 10:07 AM
I ended up going with the BMW screws. Part number 07 11 9 907 623.

http://www.bavauto.com/assets/imglib500/07119907623.jpg

I bought the same screws at Home Depot. Didn't remember the size tho...


Sent from my DROIDX

quikryptonite
03-22-2011, 10:42 AM
I ended up going to the local hardware store and bought some 5X12mm screws with a .8 pitch. They worked great. Thanks you guys.