PDA

View Full Version : Rear Camber Arms upgrade : SPC, Eibach, turner godspeed?



ravenclaw
07-20-2018, 11:07 AM
Hi,
I am looking to purchase rear camber arms for my ZHP. Have any one used SPC, Eibach, Turner or Godspeed camber arms? If so it would be good to get some inputs on the same. The cost seems to vary a lot between these brands.

https://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Suspension/Camber_Kits/

Looking mostly for street kind of camber arms.

Regards
Raj

sillieidiot
07-21-2018, 07:22 PM
They are pretty much all similar imo. The aluminums are lighter than the steel. However, the steel ones are less likely to bend. You would want the ones with the rubber bushings for the street. I'm currently using the Turner street ones. The minimum camber I can get currently is -1.8 deg. I like that the adjustments are located closer towards to wheel so that it's easier access. But that's about it.