PDA

View Full Version : Front End Rattle



Mtnman
06-22-2011, 02:25 PM
Ok boys and girls. Looking for some help here. I have a metal on metal sounding rattle from the front end area of my car when I go over bumps and heavily alligatored pavement.

3 weeks ago, i installed H and R cup kit (shocks, springs, struts). today, I installed Meyle HD Lower control arm bushings...(thanks for the write up keith..that only took an hour and a half total time because of you)

My car feels great with the new bushings, but the rattle is still there. I thought it was coming from the bushings, but obviously it was not. What else could it be? where should i begin to look? If i cant figure this out, Ill have to take it to someone and pay them for to investigate it.

Thanks in advance!

David

ZSP-Mafia
06-22-2011, 02:31 PM
Sounds like it could be your endlinks. If you can get the front wheels off the ground, grab the sway bar and yank it back and forth. There should be no noise at all.

Hornung418
06-22-2011, 02:52 PM
Sounds like it could be your endlinks. If you can get the front wheels off the ground, grab the sway bar and yank it back and forth. There should be no noise at all.
+1
Speaks from experience...almost a month of troubleshooting. Which BTW, what's the current status of your car, James?

ZSP-Mafia
06-22-2011, 03:00 PM
The battle for perfection never ends. :)

danewilson77
06-22-2011, 03:02 PM
Could be FSM's?

Droid + Tapatalk = FTW!

Mtnman
06-22-2011, 03:28 PM
Alright. Fixed. Thanks ZSP!! Passenger sway bar end link was loose. tightened it and no more rattle. Perfect. Car is alive again with new suspension and new LCABS. Thanks everyone.

Marcus-SanDiego
06-22-2011, 03:29 PM
Another Mafia win.

Hornung418
06-22-2011, 03:30 PM
Awesome to read, Dave!

danewilson77
06-22-2011, 03:31 PM
Well done folks. On to the next one.

Droid + Tapatalk = FTW!

ZSP-Mafia
06-22-2011, 03:47 PM
I finally got one right!! :)
Glad it worked out.

kayger12
06-22-2011, 03:53 PM
today, I installed Meyle HD Lower control arm bushings...(thanks for the write up keith..that only took an hour and a half total time because of you)

David

Welcome! Glad it helped.