PDA

View Full Version : Oil Change/air pump design



SoarinZHP
07-27-2011, 05:20 PM
Geez... I'm used to working on BMW's and consider myself familiar with their peculiarities when doing straightforward basic maintenance. Anyone know why or when BMW changed the airpump design to this? In past I've been able to squeeze an oil bottle right where the new big hose coming off the top is located. That hose wasn't always there, was it? Grrr.

http://i1199.photobucket.com/albums/aa475/mrkrisb/photo-3.jpg

On my old E46, I could get the oil into the filler without spilling. With this new design, it was a complete cluster. If I wasn't in a hurry I would have pulled the covers to clean properly. Instead I used brake parts cleaner and a shop rag. WTH?

Do you mafiosos use a funnel or what?:scratchinghead

danewilson77
07-27-2011, 05:34 PM
I have always used a funnel. My 2001....325i....was the same design as my current 2004 ZHP.

HTC Thunderbolt+TT

danewilson77
07-27-2011, 05:37 PM
I was wrong. You are right. My old car below.

http://i1015.photobucket.com/albums/af278/nicee46/Silver%20Bimmer/DSC02626sz1200.jpg

My current...

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/IMAG0173-1.jpg

I have no idea when it changed. Funnel makes it easier though.

HTC Thunderbolt+TT

spencers
07-27-2011, 05:39 PM
Mine looks like dane's old car.

I pour oil straight into the crankcase from the bottle. I have a steady hand from my many years of pipetting

danewilson77
07-27-2011, 05:41 PM
Mine looks like dane's old car.

I pour oil straight into the crankcase from the bottle. I have a steady hand from my many years of pipetting

Ahhhh....chemist!

HTC Thunderbolt+TT

SoarinZHP
07-27-2011, 06:27 PM
I've simmered down on this one.... I'll be getting a funnel. I'm sure there's some logical reason (or not) reason for the change... I don't know why I got bent out of shape.... Sorry to send disruptive mojo in the mafia...:devilish

Marcus-SanDiego
07-27-2011, 07:24 PM
I've simmered down on this one.... I'll be getting a funnel. I'm sure there's some logical reason (or not) reason for the change... I don't know why I got bent out of shape.... Sorry to send disruptive mojo in the mafia...:devilish

No worries. We did sense a disturbance in the Force, though. Sounds as though things are getting better now. :biggrin

kayger12
07-28-2011, 12:34 AM
Looks like the change was in '04.

My '03 had the old style pump.

Droid X. Tapatalk. Use it.

az3579
07-28-2011, 02:50 AM
Tilt the oil container sideways, pour. You will have absolutely no problems as long as you aim properly. Will flow nice and smooooooooooth.
Not quite understanding why that air pump is in the way... ??

shanneba
08-10-2011, 01:23 AM
The change happened in 03/2003 when the ECM switched to the MS45. The new style has a MAF that measures the airflow for the secondary air pump. They also changed the intake MAF to one with a 6 pin connector (5 pins used) that supplies the intake air temperature instead of a separate sensor in the intake manifold.

danewilson77
08-10-2011, 04:54 AM
The change happened in 03/2003 when the ECM switched to the MS45. The new style has a MAF that measures the airflow for the secondary air pump. They also changed the intake MAF to one with a 6 pin connector (5 pins used) that supplies the intake air temperature instead of a separate sensor in the intake manifold.

Ahhh...so after 03/2003 no iat sensor.

HTC Thunderbolt+TT

Marcus-SanDiego
08-10-2011, 05:40 AM
The change happened in 03/2003 when the ECM switched to the MS45. The new style has a MAF that measures the airflow for the secondary air pump. They also changed the intake MAF to one with a 6 pin connector (5 pins used) that supplies the intake air temperature instead of a separate sensor in the intake manifold.

Good information. Welcome to the site.