PDA

View Full Version : $100 headers too good to be true?



Jlastor
08-11-2011, 10:55 AM
I knew that I could get a good deal on headers through ebay. But i did not know that they could be in such a good price.

This headers seem like a good deal. Could this actually be true, or will I encounter fitment, performance issues?

http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574947307&toolid=10001&campid=5336776893&customid=&mpre=http%3A%2F%2Fcgi.ebay.com%2Febaymotors%2FRaci ng-Header-BMW-325-330i-E46-2001-2002-2003-2004-2006-_W0QQcmdZViewItemQQfitsZModelQ3a330iQQhashZitem519 a687bd1QQitemZ350482889681QQptZMotorsQ5fCarQ5fTruc kQ5fPartsQ5fAccessories%23ht_3128wt_939

telijah
08-11-2011, 12:22 PM
It's fairly easy for a good shop to make headers that simply have larger plumbing, so it is perfectly possibly to make cheap headers. Now, the more expensive headers usually have a little more R&D done, which increases the cost. The seller is a high volume seller with a pretty good feedback rating, so $100 headers may work and fit fine, but it's questionable how beneficial they'll actually be. But even well designed/researched headers give nominal HP gains, it all depends on if you're going for performance or sound. Personally, unless you've also done an intake swap and full exhaust, headers alone will not do you much good but get a nice sound out of them.

danewilson77
08-11-2011, 01:03 PM
These should work swell.

HTC Thunderbolt+TT

Overlord475
09-12-2011, 01:37 PM
What kind of HP / Torq gains can be expected? You'll be losing back pressure from the lack of CATs....

danewilson77
09-12-2011, 01:39 PM
What kind of HP / Torq gains can be expected? You'll be losing back pressure from the lack of CATs....

>20 HP...if you do exhaust as well.

HTC Thunderbolt+TT

Hermes
09-12-2011, 02:32 PM
unless you've also done an intake swap and full exhaust, headers alone will not do you much good but get a nice sound out of them.

+1

05ZIPPYZHP
09-13-2011, 04:35 PM
I have the exact headers. The material used is good and seems like they will hold up. The biggest issue they promote is fitment to the exhaust pipe flanges and the location of the O2 Sensor bung holes. A good $100 spent in my opinion though.