PDA

View Full Version : Chugging



midlandtech
08-15-2011, 05:56 AM
Hey guys i got the clutch fly wheel assemble replaced did tranny fluid and diff seals and fluid at that time too and car shifts great and runs smooth however i noticed that while sitting at idle there is an audible 'chugging' comming from the engine/exhaust note almost as if there was a more aggressive cam in the car any ideas?

danewilson77
08-15-2011, 07:22 AM
Interesting. I hope you post a DIY on this....

telijah
08-15-2011, 07:51 AM
Are you throwing any codes? This is probably just a coincidence, not having anything to do with the work you just did.

billschusteriv
08-15-2011, 07:53 AM
Is the 'chugging' just the sound or is there a noticeable rise/fall in RPM with the sound?

mikeyb74
08-15-2011, 08:11 AM
Is the 'chugging' just the sound or is there a noticeable rise/fall in RPM with the sound?

I was just going to ask the samething.

midlandtech
08-15-2011, 08:20 AM
Is the 'chugging' just the sound or is there a noticeable rise/fall in RPM with the sound?

It just threw a code I have a buddy bringing a reader over so I can see what it is. The chugging is more or less a rough feeling... Slight shutter felt through the floor board and burble heard in the exhaust and a very very small variation noticed in the rpms as seen on the tach... I'm thinking coil pack or spark plug but have no real idea

-- Sent from my Palm Pre using Forums (http://developer.palm.com/appredirect/?packageid=com.newnessdevelopments.forums)

midlandtech
08-15-2011, 08:55 PM
codes read that the engine is running lean got to look through the intake for a crack somewhere... anyone have any tips while i trouble shoot?

mimalmo
08-15-2011, 09:22 PM
I thought this was going to be a thread about drinking beer.


*disappointed*

pleasecorrupt
08-15-2011, 10:01 PM
+1 thought there were secret techniques to be discussed

telijah
08-16-2011, 07:04 AM
There's a popular picture of the intake plumbing where it splits off in a Y shape that is known for cracking.

danewilson77
08-16-2011, 07:54 AM
There's a popular picture of the intake plumbing where it splits off in a Y shape that is known for cracking.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/Intakebellows144.jpg

HTC Thunderbolt+TT

telijah
08-16-2011, 07:55 AM
There ya go, I've really gotta save that to Picasa or something for quick access. That, and the little "F" pipe that likes to snap.

danewilson77
08-16-2011, 08:45 AM
There ya go, I've really gotta save that to Picasa or something for quick access. That, and the little "F" pipe that likes to snap.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/CellPhone367.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/CellPhone366.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/CellPhone364.jpg

mimalmo
08-16-2011, 08:52 AM
These are not cheap but will last a lifetime and they have improved airflow.

http://www.shop.stettperformance.com/product.sc?productId=22

danewilson77
08-16-2011, 09:19 AM
These are not cheap but will last a lifetime and they have improved airflow.

http://www.shop.stettperformance.com/product.sc?productId=22

Yup. Dos are da shiz. I wonder if they work better with the AFE intake.

midlandtech
08-17-2011, 01:06 PM
sweet thanks guys.. gonna take a look at it tomorrow and let you know what i find out