Predator V2 Angel Eyes Remote Feature

[HokieZHP]

Hey guys, so I was browsing the umnitza site and saw that my Predator V2 angel eyes have a remote feature that fades the Ae's in and out when locking and unlocking the car. How can I activate this?

[pleasecorrupt]

It's not activated so much as installed, if your v2s has that option, you could opt to do what I did and tap into the front passenger foot light through a hole from the engine bay near the positive negative terminals through near the glove compartment, splice the wires and wallah. There's a diy somewhere if someone wants to find it, I'm mobile right now.

[mimalmo]

It only takes about 5 minutes to do. I think it takes longer to gather the tools needed and put them away when done.

[M0nk3y]

Yep, easy install.

Drop your whole glovebox and shove the wire through the firewall. Hook it up and done...very easy to do

Sent from my DROID X2 using Tapatalk

[HokieZHP]

Alright cause I tapped into the ECU. If I hook it up to the footlight, will they still act as the running lights?

[mimalmo]

Yes.

[iZHP]

they turn on when the interior lights are on, and stay on during driving. They do the fade in and out upon locking/unlocking.

[cakM3]

Here's the video from uTube on how to hook up the remote feature :thumbsup

http://www.youtube.com/watch?v=oI95QUH_mP0 (http://www.youtube.com/watch?v=oI95QUH_mP0)

Hope this helps!

[zj96sc]

If I could offer my 2 cents I'd recommend to avoid those T-Taps. They're total garbage. Do yourself a favor and strip, solder, and heat shrink the connections properly. Also make sure you grommet the wires traveling through the firewall properly. Accidental grounds to chassis aren't something you want.