PDA

View Full Version : DME tune options for Step?



Hermes
10-17-2011, 07:57 PM
since I was reading earlier that the Conforti Shark is only available for ZHPs w/6MT that makes me wonder what is available for me? The Dinan site doesn't say anything about restrictions, neither does Active Autowerke. Any other ideas/recommendations?

from TMS: http://www.turnermotorsport.com/p-269-e46-325330-conforti-shark-injector-performance-software.aspx

This Shark Injector works on the 2001-2006 E46 325 (manual and automatic transmission) and 330 (manual transmission only), including 325i, 325xi, 325Ci, 330i, 330xi, 330Ci (including ZHP package and the 325 with California/Mass M56 SULEV engine).
* - not for 330 with automatic transmission or SMG


also, I could be wrong and they just mean regular 330s, not ZHP but i dunno

johnrando
10-17-2011, 08:35 PM
Not sure of other options, just want to vouch that AA works on automatics.

UdubBadger
10-17-2011, 08:44 PM
i know these guys can do it.

http://www.eurocharged.com/

Hermes
10-17-2011, 09:40 PM
Not sure of other options, just want to vouch that AA works on automatics.

cool, just waiting to see if you get the issue with SB solved before I go that route


i know these guys can do it.

http://www.eurocharged.com/

I only saw E9X on their site (?)

UdubBadger
10-18-2011, 04:07 AM
its not listed but they will do it. +11hp/+11tq are the gains I see... they raise the torque limiters, modified intake and exhaust VANOS maps, adjust base ignition angle and ignition angle at full load, maximum relative load maps, and full / part throttle fueling.