PDA

View Full Version : Replacing BMW E46 front grille doityourself



Tampa330i
12-21-2010, 08:18 PM
For those of you who've done the black grille install - how do you separate the grille pieces? They seem to be very tightly latched together and it feels like I'm going to break it trying to pull them apart. Does anyone have any advice or pictures?

EDIT:


http://www.youtube.com/watch?v=BZdwpPA1fGE

danewilson77
12-21-2010, 08:50 PM
Gotta use a flat tip screwdriver, and gently...I saw gently seperate the two pieces at the latch. Stick you fingers in there (yes...pain is required for this evolution) and hold it spread apart a little as you unclip them all the way around. Be careful as breaking the clips is common...

Marcus-SanDiego
12-21-2010, 08:52 PM
Instead of using a screwdriver, I used a flat, small piece of wood to slip between the clips. Made it easier than screwdriver.

Tampa330i
12-21-2010, 08:59 PM
It seems like theres a black peg pointing down into the tab, but no matter how hard I push the tab won't clear it. I've been trying to seperate them for hours with no luck. :(

mimalmo
12-21-2010, 09:00 PM
No need to take the new ones apart. They just go in there. There are a few tabs that lock them into place.

danewilson77
12-21-2010, 09:11 PM
^and they just slip in from the front? I did not know this. Diffderent than prefacelift...

mimalmo
12-21-2010, 09:25 PM
Correct. Mine made a loud snapping sound that made me jump a little since I thought something was breaking but that's how they go in.

Marcus-SanDiego
12-21-2010, 09:32 PM
http://www.youtube.com/watch?v=BZdwpPA1fGE

BMW Grill Replacement ZHP E46.

And then when you reinstall, you just firmly push in. There will be some resistance -- but firmly push until the clips accept the new grill.

Tampa330i
12-21-2010, 09:44 PM
I hope they are supposed to come apart, because I finally got them to separate. It looks like the 2 pieces snap together around the holes in the hood where they insert with 6 snapping tabs. I guess it's possible to use the stock back piece since it isn't seen. I haven't tried to install them yet because it's dark but I'm pretty sure there is no way these were going in without taking them apart.

Tampa330i
12-21-2010, 10:29 PM
That video is for pre-facelift e46. The grille was changed in the facelift, no? I'll find out for sure tomorrow morning.

mimalmo
12-21-2010, 10:33 PM
They all go in/come out pretty much the same.

Marcus-SanDiego
12-21-2010, 10:35 PM
That video is for pre-facelift e46. The grille was changed in the facelift, no? I'll find out for sure tomorrow morning.

My car is a facelift. It worked the same way on mine.

Tampa330i
12-22-2010, 12:28 AM
Excellent! There should be some new pics tomorrow for the tails and grille.

pyreguy
12-23-2010, 08:51 AM
I just pushed my new ones in and they snapped in place. Took all of 30 seconds.

Smilez
12-23-2010, 08:58 AM
BRING OUT YOUR HAIRDRYERS or if you have a heatgun so you can warm up the tabs. this will help with flexibility.

Washburn
12-23-2010, 10:01 AM
Please do...thanks.