PDA

View Full Version : Plasti-dipping bolt heads



HokieZHP
01-11-2012, 12:01 PM
Hey guys, a few of my wheel bolt heads are rusted or corroded or whatever they are but it looks bad IMO and they work fine, so I'm hesitant to spend the money for new ones. What do y'all think about plastidipping the heads of them back to black again?

Just an idea I thought of just now


Sent from my iPhone using Tapatalk

zj96sc
01-11-2012, 12:08 PM
Plastidip will not survive torquing them. It is not incredibly durable stuff when it comes to direct mechanical contact. It is also pretty thick and depending on how well your favorite socket fits you might scrape the stuff off just putting a socket on them. You're better off just cleaning them up very well with a wire brush and possibly hitting them with clear lacquer or just keeping them clean.

good wirebrushing and a sharpie might actually work.

HokieZHP
01-11-2012, 12:11 PM
oh good idea on the wire brush. I may just do that and then hit them with something to clean them up. I've never used plasti-dip before so I don't have any idea on how it looks/functions

thanks

zj96sc
01-11-2012, 12:19 PM
I shadowlined my E30 with the stuff which took for EVER, so I got pretty intimate with it.

It is great at resisting stuff like stone chips and abrasion, but if you dug your fingernail into it and scraped it will come right off. It also peels up whole which is nice for a mulligan if you messed up but means once it starts to peel it pretty much won't stop.

Good product in certain applications but this isn't one of them. Spraypaint would be better suited, but I'd try a sharpie first.

Johnmadd
01-11-2012, 12:45 PM
Maybe try caliper paint, I don't know if it more durable than regular spray paint but would imagine it is.

HokieZHP
01-11-2012, 12:49 PM
Maybe try caliper paint, I don't know if it more durable than regular spray paint but would imagine it is.

That's along the lines of what I was thinking. Using an engine or other durable type of spray paint. I'll see what I can find at my local hardware store.


Sent from my iPhone using Tapatalk

kayger12
01-11-2012, 03:03 PM
I had the same issue. Was triggering my OCD.

I bought these from Bimmian.

http://www.bimmian.com/elements/product.htm/showcase/WBC/ML_050.jpg

http://www.bimmian.com/46/WBC/#

johnrando
01-11-2012, 03:18 PM
ooh, I like. Gonna have to get some.

HokieZHP
01-11-2012, 06:38 PM
I was thinking about those since both of my parent's Audi's have them but then you have to take each one off with needle-nose pliers to take the wheel off which is kinda a pain.

kayger12
01-12-2012, 02:51 AM
I was thinking about those since both of my parent's Audi's have them but then you have to take each one off with needle-nose pliers to take the wheel off which is kinda a pain.

Nah, they give you a special tool with the kit. Super-quick.

Takes less than 2 seconds per cover to take off.

I just keep it in my glove box.

Droid X. Tapatalk. Use it.

danewilson77
01-12-2012, 04:53 AM
As an alternative.... I made a jig out of a block of wood, and just rattle canned the tops of the lugz. Really, this is a majority of what is visible when installed and is not contacted when removed or installed.

HTC Thunderbolt+TT

ryankokesh
01-12-2012, 05:17 AM
As an alternative.... I made a jig out of a block of wood, and just rattle canned the tops of the lugz. Really, this is a majority of what is visible when installed and is not contacted when removed or installed.

HTC Thunderbolt+TT

Any pics of this jig you speak of?


Sent from my iPhone using Tapatalk

zj96sc
01-12-2012, 05:23 AM
I'm going to go with "drill 5 holes in a 2x4 @ the diameter of the lug bolt."

cardboard will work too. or the bottom of an egg carton, whatever. just something to hold them so you don't have to and to keep paint off the threads.

ryankokesh
01-12-2012, 06:45 AM
gotcha

danewilson77
01-12-2012, 08:18 AM
I'm going to go with "drill 5 holes in a 2x4 @ the diameter of the lug bolt."

cardboard will work too. or the bottom of an egg carton, whatever. just something to hold them so you don't have to and to keep paint off the threads.

Actually is was a 4x4....hehe

derbo
01-12-2012, 09:05 AM
I painted mine with high temp flat black paint

http://www.homedepot.com/h_d1/N-5yc1v/R-202315061/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

http://www.homedepot.com/catalog/productImages/300/4c/4cd22e20-efb6-4bb1-875d-7bd21bf19c8a_300.jpg

ryankokesh
01-12-2012, 09:16 AM
Anyone paint theirs something other than black? That could be an interesting little touch...?

danewilson77
01-12-2012, 09:59 AM
Yes...I painted mine Imola....and black before....but since I went with the TMS spacers...I got new black lugz.

Painted black
http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/6224076823_42b7ed431b_b.jpg

Painted Red > Did start chipping because I wasn't careful when putting my socket on there. I have my wheels off typically, once per week.
http://i1015.photobucket.com/albums/af278/nicee46/IMAG0228-1.jpg

zj96sc
01-12-2012, 10:07 AM
I have my wheels off typically, once per week.

.......why

danewilson77
01-12-2012, 10:24 AM
.......why

Routine inspections chap. I like to check up on things....and wipe the barrels clean on those BBS's.

zj96sc
01-12-2012, 10:37 AM
Pretty vigilant. Props.