PDA

View Full Version : Pulley Torque Specs



johnnyrad
01-19-2012, 04:43 PM
Need some friendly family help. I'm going to replace my deflection, tensioner, power steering, water pump, and ac pulley on Saturday for the Alpineweiss and I'm having a bear of a time finding the torque specs for these as well as if the bolts are reverse threaded. Anyone have their experience to share doing these?

kayger12
01-19-2012, 04:47 PM
I don't remember any of them being reverse thread.

Stand by and I'll see what i can dig up for specs.

kayger12
01-19-2012, 04:49 PM
I'm gonna be honest-- I think I just snugged them up.

I don't remember torquing any of them.

I'll check the Bentley, though, and see what I come up with.

johnnyrad
01-19-2012, 04:56 PM
Thanks Keith. I looked in the Bentley and found zippo. Many other BMW forums give different torque specs so I'm really not sure. But if you just snugged your's down then hell that will work for me. Mafia approved. :)

danewilson77
01-19-2012, 04:59 PM
Nothing reverse threaded. I'm going to throw links at you...

http://tis.spaghetticoder.org/s/view.pl?1/00/32/75

danewilson77
01-19-2012, 05:09 PM
Here we go....

All BMW torques specs....

Had to make an account over at BimmerforumsUK to download it...hehe

johnnyrad
01-19-2012, 05:12 PM
^Duuuude! That's crazy insane...


Had to make an account over at BimmerforumsUK to download it...hehe

So now you can talk to the Brits about the ZHP and how it's more special then their club sport or whatever hahaha.

kayger12
01-19-2012, 05:12 PM
Thanks Keith. I looked in the Bentley and found zippo. Many other BMW forums give different torque specs so I'm really not sure. But if you just snugged your's down then hell that will work for me. Mafia approved. :)

No problem. I'd just snug 'em.

Anyone disagree?

Hornung418
01-19-2012, 06:04 PM
I snugged mine, and they backed out...

I do 11 lb/ft.

kayger12
01-19-2012, 06:06 PM
I snugged mine, and they backed out...

I do 11 lb/ft.

I think my snugging was about that-- but I'm gonna check tomorrow now.

Hornung418
01-19-2012, 06:14 PM
Guys at the shop said I only had three bolts holding the WP pulley and all of them were finger tight.

kayger12
01-19-2012, 06:33 PM
Guys at the shop said I only had three bolts holding the WP pulley and all of them were finger tight.

Wow. I'll check tomorrow and report back.

Droid X. Tapatalk. Use it.