Here is what your ZHP will sound like with headers, no cats/resonators, and a 3" pipe in the middle of a custom exhaust install

[Jesse M]

Like the title said, this was in the middle of my custom exhaust setup, I just wanted to hear what the damn thing would sound like. 2-3-4 shifting that was around 90mph passing the camera. A member on here that posted a thread titled "straight piped" inspired me to make the thread. hah
http://www.youtube.com/watch?v=dc4Xml1gwyM

10-80ish
http://www.youtube.com/watch?v=8m3t7xvppSY&feature=youtu.be

20-90
http://www.youtube.com/watch?v=a9gPBFaS1Cs&list=UUruhBXtTE-6Sj6698xbK3Dg&index=1&feature=plcp

and my dyno pull
http://www.youtube.com/watch?v=FWegCDswP_4&list=UUruhBXtTE-6Sj6698xbK3Dg&index=2&feature=plcp

Buddy took the vid for me, he's got the sti in the vid and the Z is my brothers.

If anyone was wondering, here's what I came up with. My buddy did all the welding and fab work. I designed it. Dyno results were 210whp 193tq on a "mustang dyno."

Doesn't drone AT ALL, at ANY rpm. Highway is actually quite while cruising.

Some of you may have seen my thread on Bfc but here are a few pics:
V-banded the exhaust for easy removal in sections. Muffler is a magnaflow single 3" in, dual 2.5" out and we made stainless steel tips. I like the raw look.

http://img708.imageshack.us/img708/4287/imag0105s.jpg (http://imageshack.us/photo/my-images/708/imag0105s.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img263.imageshack.us/img263/5606/imag0097gv.jpg (http://imageshack.us/photo/my-images/263/imag0097gv.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img560.imageshack.us/img560/742/imag0106wy.jpg (http://imageshack.us/photo/my-images/560/imag0106wy.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img204.imageshack.us/img204/9998/imag0108zv.jpg (http://imageshack.us/photo/my-images/204/imag0108zv.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img580.imageshack.us/img580/3862/imag0107ej.jpg (http://imageshack.us/photo/my-images/580/imag0107ej.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img705.imageshack.us/img705/5301/imag0110cm.jpg (http://imageshack.us/photo/my-images/705/imag0110cm.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[ZHP-FTW]

Nice. Do you have any other mods done or a tune yet?

[Hornung418]

Damn, that's a nice set up! My only issue is the insane amount of lights on your cluster.

Innovate LC-1 will clear that up for you.

Sounds very nice in the first video.

[ryankokesh]

Some windshield washer fluid would help too, lol :thumbsup

Sounds amazing though!


Sent from my iPhone using Tapatalk

[Jesse M]

Thanks guys, about the lights, that was right after I had cleaned up and deleted a bunch of stuff from the engine bay. I have my laptop hooked up with INPA and cleared everything. I also drive with DSC completely disabled most of the time so the traction control light and yellow brake light stay on till I shut the car off or press the button again. The only light on now is the windshield washer fluid because I took that out too. That was also before I flashed to euro software, so no CEL for catless headers anymore.

I'm still trying to figure out a way to trick the sensor so it thinks I have fluid so the light will go off. ideas?

[Hornung418]

How did you run MS45.1 with European S/W? The MS45.1 DME was never sold in Europe.

As for the fluid level sensor. Take some 22 gauge copper wire and connect pins 1 and 2. That will complete the circuit and not have a light. I taped mine over with electrical tape to avoid any further issues.

[BRGcoopahS]

That sounds amazing. I would totally daily a car that loud.