PDA

View Full Version : AFE Stage 1 intake: Coupe fitment



Blaster3500
06-03-2012, 07:48 AM
When looking for an intake for my zhp lots of people recommended the afe. When looking on their site they do not show an intake for a coupe. After doing a bit of searching people said it would fit a coupe and other said it would not. I pulled the trigger and decided to find out for myself. The heat shield will not fit right out of the box because it hits on the back of the headlight housing. It is an easy fix I used a file to make a small notch on the height shield and then used a little place paint. After that it will clear the headlight and fit perfect. Here is a few pictures that I took on my phone during the install.

http://i4.photobucket.com/albums/y132/blaster3500/afe2.jpg

http://i4.photobucket.com/albums/y132/blaster3500/afe1.jpg

http://i4.photobucket.com/albums/y132/blaster3500/afe3.jpg

danewilson77
06-03-2012, 08:22 AM
Excellent info. Wonder why AFE just doesn't make one, fitted this way. I would let them know this is your fix.