US Mill Works Tow Hook Licence Plate Bracket

[danewilson77]

I got my US Mill Works LPB today in the mail. It came in a postage envelope which caught me off guard. Once opening the package, I was greeted by a well packaged, well thought out, engineering marvel. I love the way this bracket was designed and being an engineer, really appreciate the thought that was put into the materials, operation and overall design of the unit.


COST: $75.00

TIME TO INSTALL: 15 minutes

Bracket allows for a nice "parallel to bumper" fit. Fit and finish is 10/10 and overwhelms the Gominigo bracket.

Packaged.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/IMAG0187.jpg

Un-packaged with exception of small hardware pouch.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/IMAG0188.jpg

Various mounting holes are tapered to provide for flexibility of mounting position and a nice flush fit.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/IMAG0189.jpg

Various hardware. Not all is used. I did not use the spacers (washers). I used the four black license plate hex screws and four tapered flush fit mounting screws. That's it.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/IMAG0190.jpg

I decided to go with the mid position initially, but may relocate in the future.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/IMAG0192.jpg

Top view, parallel to bumper. Swivel in action.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/IMAG0193.jpg

Side view, looking from drivers side.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/IMAG0194.jpg

Overall pic, with mount installed.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/74b4a17d-1fdf-4a97-bc95-6e5dea57fada.jpg

Overall pic, with plate attached.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/c82ec592-1aac-43c6-9617-d1f6790be5a4.jpg

Just need to fix the gap in my trim.

[Newjack]

Looks great Dane. I think I might trade in my bracket for this one. The only thing I don't like about the gominigo bracket is how much of a pain it is to take on and off. Without bending the metal bracket you can't take it off without scratching yup your paint on the bumper. Does this bracket have the same problem?

Sent from my Nexus 4 using Tapatalk 2

[danewilson77]

You need to take license plate off, then loosen swivel to remove. Video below will give you an idea.


http://www.youtube.com/watch?feature=player_embedded&v=RvUGUtl0mII#!

[M0nk3y]

Dane. Better than the other options?

I was waiting for a friend to throw his on, but he hasn't yet


Sent from my iPhone using Tapatalk

[Dave_B]

Looks great, Dane.

Parts look well thought out and engineered.

[danewilson77]

Dane. Better than the other options?

I was waiting for a friend to throw his on, but he hasn't yet


Sent from my iPhone using Tapatalk

Yeah Kyle. You will appreciate the design and materials. Seriously.



Looks great, Dane.

Parts look well thought out and engineered.

Thanks Dave.

[M0nk3y]

Yeah Kyle. You will appreciate the design and materials. Seriously.




Thanks Dave.

Good deal.

That ball and joint both metal?


Sent from my iPhone using Tapatalk

[Newjack]

Dang I want this. Is it a PITA to get the license plate level? Its pretty tough with the gominigo bracket

Sent from my Nexus 4 using Tapatalk 2

[danewilson77]

Good deal.

That ball and joint both metal?


Sent from my iPhone using Tapatalk

Some type of composite I believe. I think he mentions it in video.

Sent from the HTC DNA, Williamsburg, VA and USA

[M0nk3y]

Some type of composite I believe. I think he mentions it in video.

Sent from the HTC DNA, Williamsburg, VA and USA

Gotcha, looks very impressive. Placed an order.

Thanks Dane for the time and pictures

[danewilson77]

Gotcha, looks very impressive. Placed an order.

Thanks Dane for the time and pictures

You bet Kyle.

Sent from the HTC DNA, Williamsburg, VA and USA

[johnrando]

Nice review Dane. To answer some other comments, I don't have any issues with on/off of the gominigo one as far as bending, etc. Just unscrew... my issue is that there are 4 screws/nuts and it takes awhile (which is actually a good thing). Also, no issues with getting level, just tighten one both, then the other, then adjust back. It's a little more art than science, but not difficult. Certainly harder than just putting it up with a std plate holder but not a big deal by any means. Not saying gominigo is better, I just hope that helps answer some questions from my perspective. From the sounds of it, this kit might be better.

[Hermes]

I might have to order one soon, nice find Dane!

[oldzilla]

Just ordered one thanks Dane!

[Vas]

i need to buy one as well.

[johnrando]

I'm buying a quick release one so I'm going to list my gominigo once it arrives.

[danewilson77]

Bump.

The friendliest forum on the planet.

[Vas]

I ended up getting a gominigo bracket as a gift. No complaints with it.

[azimibaha1]

I just installed my US Mill Works bracket with quick release. Fit, finish, materials are top notch. Very much recommended. I found this here, so thanks for the idea!

26438

[NoVAphotog]

I just installed my US Mill Works bracket with quick release. Fit, finish, materials are top notch. Very much recommended. I found this here, so thanks for the idea!

26438

One of the first things I bought for my car. Love it. Definition of you get what you pay for. Also, hello from the DMV!

[TheFinanceGuy]

I miss DC.


Sent from my iPhone 6s using Tapatalk

[danewilson77]

I just installed my US Mill Works bracket with quick release. Fit, finish, materials are top notch. Very much recommended. I found this here, so thanks for the idea!

26438
US Millworks is a finely crafted plate caresser.

S7 Edge, out

[johnrando]

Lol. Yes, a good product.

Sent from my SM-G935V using Tapatalk

[Ridgey]

US Millworks is a finely crafted plate caresser.

S7 Edge, out

Hey does this US Millworks bracket work with a BMW license plate frame? Trying to find an answer. Would I need longer screws?

[danewilson77]

Hey does this US Millworks bracket work with a BMW license plate frame? Trying to find an answer. Would I need longer screws?

No....Not really designed for a frame though I'm sure you could make it work.