I'll try! I'm always bad about that stuff. But it'd be a great start to a "build" thread, although not sure how much more I'll be doing to
racer2086 Today, 11:02 AMCash talks, bullshit walks these days. When I bought my TRDP 4runner, the guy would only accept a wire transfer bank to bank
Looks like
I decided I'm just going to fly up Friday morning and take care of everything myself. Flight booked, insurance secured. Can't wait!!
racer2086 Today, 09:14 AMI don't think a good daily needs to be maintenance-free... and an E46 is a pretty reliable car when you stay up to date on your maintenance.
^ The 1994 E36 M3's with the euro-spec S50B30 are now eligible for import to the U.S. Granted, "only" 286hp, but just a couple of more years
az3579 Today, 08:45 AMIf any of us truly wanted a reliable daily, we'd have a Honda or Toyota. lol
az3579 Today, 08:42 AMAm I doing it wrong? I thought DDs were supposed to be reliable and maintenance-free. Maybe I should buy a 335i? Or 760Li? Or 850csi... definitely this
DeathTrap Today, 07:31 AMHey All, still searching.....
Year(s): 2003-2005 (any years the sedan was made is fine, ideally 2005)
Budget: $10-20k range, depends
Very COOL picture!
Sent from my iPhone using Tapatalk
Okay, I thought it's time to start a project thread. I've never chronicled a project before so here goes nothing... I hope it can provide some motivation
Last Post By: Will Yesterday, 11:30 PMHey all,
My 330i/5 has some random shifter in it at the moment (had to replace the one it had when I first bought it since it scraped the
I've read about Schmiedmann.com for years, but never purchased from them. Is there additional VAT charged on purchases, especially shipped to Virginia?
Last Post By: John in VA Yesterday, 03:44 PMI have a new in box thermostat I purchased that I no longer need. I don't remember the brand, but I'll open the box when I get home today and check.
Last Post By: Phillips0417 Yesterday, 06:10 AMPreferably silver, willing to pay shipping. Greenville, SC.
Sent from my iPhone using Tapatalk
The title pretty much says it all, I'll be doing a VCG replacement soon. I've never done this job before but I've seen some very helpful tutorials on
Last Post By: Yankeefan Yesterday, 09:03 AMAsking $375
This is my original E46 M3 6MT steering wheel that was custom wrapped by Dallas steering wheel in Dallas Texas.
Well, I finally pulled the trigger on doing some Solo action this year. The event is tomorrow (02/16/2019) and I am nervous because I know my rear end
Last Post By: johnrando 02-17-2019, 03:19 PM
2015 328i xdrive sport wagon
I beg to differ. I own a 2015 F33 convertible (435ix) and it is not a trash vehicle at all. It is an impressive ride. Yes, the steering is not stiff
wstr75 Today, 11:21 AM