Got my 3rd Auto Airbag Settlement check for $49.10. But still nothing for the E39 530i.
But it's ok.
Printable View
Got my 3rd Auto Airbag Settlement check for $49.10. But still nothing for the E39 530i.
But it's ok.
I wish Canada had that! That's not bad at all
Finally back on the road again; installed a BMW Remanufactured alternator today. Looking at my LOG this probably crapped out on me in the late March, early April time frame. It’s been a busy summer with family visits so, it’s been on the back burner.
Additional pics from the test drive, around the Hood.
https://uploads.tapatalk-cdn.com/202...10733deb5e.jpg
https://uploads.tapatalk-cdn.com/202...a3032cf3df.jpg
https://uploads.tapatalk-cdn.com/202...09350b4ff0.jpg
https://uploads.tapatalk-cdn.com/202...2ffe514ba2.jpg
https://uploads.tapatalk-cdn.com/202...bbcb3cddca.jpg
https://uploads.tapatalk-cdn.com/202...3eaa387523.jpg
https://uploads.tapatalk-cdn.com/202...c9535ababb.jpg
https://uploads.tapatalk-cdn.com/202...564c4db864.jpg
https://uploads.tapatalk-cdn.com/202...6375086925.jpg
https://uploads.tapatalk-cdn.com/202...7a85df4a85.jpg
https://uploads.tapatalk-cdn.com/202...49a2bbc3f6.jpg
https://uploads.tapatalk-cdn.com/202...b010c2e8aa.jpg
https://uploads.tapatalk-cdn.com/202...f392e34bf3.jpg
Sent from my iPhone using Tapatalk
Welcome back, Guy! Your car looks amazing.
Broke ground this week with the garage build. Temporary gravel driveway went in and concrete footers were poured. https://uploads.tapatalk-cdn.com/202...45514017b1.jpghttps://uploads.tapatalk-cdn.com/202...84b64a5240.jpg
Hello, Vas. That sounds great. What's the ETA?
Worked on removing the transmission to do a clutch job today. Chickened out dropping the transmission with the cheapo HF 450lb transmission jack; going back to the store tomorrow to get their bigger 800lb one that I'm more familiar with using. Trans is currently held on by two bolts I already broke loose and the starter is free, so it's going to be easy work to finish the job.
These 6-speeds are big in the transmission tunnel! Used every extension configuration I had to get the job done. Had to break all the E14 bolts loose by hand since there was too much flex in the extensions for my impact to work; no issues with the E12 bolts with the impact though. Retorquing everything will be based on how much patience I have...