Gracias!
Hoping the lurkers like Stephenkirsch, San, that guy with that Red Rocket, and a few others will post at some point.
Printable View
https://media.giphy.com/media/TUtr2Ky56D4Zy/giphy.gif
I swear I’m an adult...
Nice, this list would be useful. These were my settings before I did M3 front fenders. I added my actual ride height measured from the top of the arch of the fender to the middle of the center cap. I wouldn't have rubbed so much, if I just raised my car up .5" lol
Coupe
Wheels: 18x9.5 ET35 square setup Hyper Silver
Camber: -2.8° front, -1.7° rear
Spacers: 5mm spacer in the front
Rubbing: yes, in the fronts on medium bumps
Rolled: yes, as flat as possible
Tires: 255/35/18 Michelin PSS
Lowered on AST 4100s @ 13" all around.
This was the only picture I could find on my build thread with the stock fenders. That sucks, I thought I had more lol
https://farm5.staticflickr.com/4365/...a200043e_b.jpg
Added. Any others?
Do EC-7s count? ;)
Sent from my SM-G955U using Tapatalk
Yo, @ZHPizza get in here you dingus.
hush
Wheels: 18x9.5 et35 Hypersilver F&R
Tires: 235/40 square
Brand: Cooper Zeon RS3-G1
Ride Height: Stock
Camber: Stock
Spacers: None
Rolled Fenders: No
Rubbing: Slight in the rear when loaded down and hitting a monster dip (note that shocks are Koni FSDs so they let the springs go full travel when hitting a dip)
Coupie boi
Front fit pics:
https://uploads.tapatalk-cdn.com/201...51f6efc949.jpg
https://uploads.tapatalk-cdn.com/201...8efe89330e.jpg
https://uploads.tapatalk-cdn.com/201...88541310b5.jpg
https://uploads.tapatalk-cdn.com/201...038e9e1eda.jpg
Rear fit pics:
https://uploads.tapatalk-cdn.com/201...b88f6406d6.jpg
https://uploads.tapatalk-cdn.com/201...d6168cd688.jpg
Profile:
https://uploads.tapatalk-cdn.com/201...f79497573b.jpg
https://i.imgur.com/1WlGY9o.jpg
Sessy:
https://i.imgur.com/flvRo2X.jpg
Updated. That's how you do pics.