Awesome thanks so much!
Sent from my iPhone using Tapatalk
Printable View
which option is that in PASoft? i'd like that...
Personally, I have only ever used NCS Expert to do this, but I would imagine PA Soft may have this option too. BP may need to confirm...
PWM_WERT2_FL_BIXENON = wert_01 [For Halogen and Bi-xenon together at high beam]
FL_UND_NSW_NICHT_GLEICHZ = nicht_aktiv [This allows you to have the fog lamps on when high beam is switched on]
If this were me I would drive my ZHP up there and find a good little spot out of the way and throw a cover on it for the following weeks. I'm sure there will be other people with cars that you could ride with or even borrow.
Sent from my iPhone using Tapatalk
You can typically buy the special cable on ebay and it would ship with a DVD (or two) with all the software (NCS Expert, WinKFP, DIS etc etc). The DVD is setup such that when you run it, it installs and configures everything on your laptop (Windows based).
Then you can learn how to use NCS Expert via the various threads here and elsewhere on other forums.
Here is a decent getting started guide:
http://www.bimmerforums.com/forum/sh...ith-NCS-Expert
This is the seller I bought the cable from:
http://www.ebay.com/itm/BMW-USB-OBD-...1/231931285961
NCS is not for the faint of heart. Someone should confirm if PA Soft can do it - this is a much easier option than NCS if it's doable.