Thanks, boss.
Looking at that pic, I'm reminded I need to get moving on the silver corner bulbs.
Printable View
Thanks, boss.
Looking at that pic, I'm reminded I need to get moving on the silver corner bulbs.
ask for $300 i can get a former bmw autobody worker to do it for $300 in NYC... so im guessing it should be cheaper over there? or you can try to knock it down... either way its worth it
If you want and feel like another project since you guys all have so much free some to be on this site...you can make a magnetic front plate. Then when you're in photoshoots it's easy to take off and leave a nice clean front end. When done, put it back on and be totally legal! Just use rare earth magnets behind your bumper as well as on your license plate. You'll just have to be creative to create an inconspicuous area where the plate contacts the paint so there scratching is kept to a minimum.
http://farm4.static.flickr.com/3653/...539_z.jpg?zz=1
http://farm4.static.flickr.com/3639/...0d6_z.jpg?zz=1
There's one magnet hidden behind the fold to stabilize.
http://farm4.static.flickr.com/3578/...430_z.jpg?zz=1
I've been near the governed speed of the vehicle with no ill effects of killing anyone behind with a loose plate. LOL
Good info, Trevor. It's tough with the coupe because we don't have a trim piece on the front bumper.
I'll be testing the plate-free waters for a while...
I like how you have the plate bent to shorten it. Nice.
Didn't want to cover up any aerodynamic air vents! LOL... +5HP from that mod!
Luckilly my state doesn't require a front plate. I went Euro and kept my vent wide open! :biggrin