Guys,
Please use this thread so we can plan the maintenance day on Sunday, October 22nd.
Thank you
Printable View
Guys,
Please use this thread so we can plan the maintenance day on Sunday, October 22nd.
Thank you
Name / Maintenance Item / Need Tools?
1. DW77 / Replace Vortex Disipator / No
2.
I need to replace my flux capacitor.
That and provide coding services.
Sent from my Pixel using Tapatalk
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
Why not just get the plug in one?Quote:
Originally Posted by Oli77
https://uploads.tapatalk-cdn.com/201...7e04c09fa9.gif
LOL. my wife bought me that one for christmas last year. it's hilarious.Quote:
Originally Posted by ELCID86
Good one Shawn.
Name / Maintenance Item / Need Tools?
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
*crickets*
I removed the headlight shroud, as that seems better for a home project.
Got you covered on tools holyc0wQuote:
Originally Posted by holyc0w
Sent from my S8+
Thanks boss
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark install
Anyone coming have a bushing tool for the rear control arm bushings?
I have one! Just need to find it.Quote:
Originally Posted by 704sw
Note: changing those greatly effects rear alignment and may result in bad tire wear on the way home.
Sent from my iPhone using Tapatalk
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark install
6. San / replace low beam headlight bulbs and possibly paint lower grill black / No
Sent from my iPhone using Tapatalk
I do not have the correct battery charger and don't want to risk bricking your dme. Bring if you have.Quote:
Originally Posted by Newjack
Sent from my S8+
Quote:
Originally Posted by 704sw
Bump!Quote:
Originally Posted by 3ZHPGUY
Do you need me to bring this???
Sent from my iPhone using Tapatalk
I think my dad has one but I'm not sure the amperage, I've read it needs to be at least 10 amps to work depending on how old the battery is. Will probably replace my battery when I'm there as well since it's already 6 years old and I don't want to get stranded one day.Quote:
Originally Posted by danewilson77
What charger do you have?
Sent from my Nexus 5X using Tapatalk
I believe it's at least 10 amps and then it's higher if the angel eyes are on. I have one, but I dropped it shortly after my shark injection...and have yet to check into getting it inspected.Quote:
Originally Posted by Newjack
I have angel eyes, but I think it's fairly easy to just unplug them for a minute while I do the install. Been a while since I've installed the angel eyesQuote:
Originally Posted by holyc0w
Sent from my Nexus 5X using Tapatalk
Do we have provisions for an oil change?
I'm over 15k on this oil change... not that it matters because I've changed my oil twice over just in top ups. lol
Still need to do it though..
Yes. Provisions on hand.Quote:
Originally Posted by az3579
Sent from my S8+
Sorry, Guy. I didn’t get an alert you’d quoted me. Don’t worry about it, I’ll do those when I do the subframe.Quote:
Originally Posted by 3ZHPGUY
The thing I need help with more than anything is drilling out a broken mounting bolt on my passenger seat. I don’t think the HPDE instructor would be thrilled knowing his seat only has 3 points of contact.
No problem! We’ll see Y’all tomorrow.Quote:
Originally Posted by 704sw
Sent from my iPhone using Tapatalk
Quote:
Originally Posted by danewilson77
Sweet, thanks.
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark install
6. San / replace low beam headlight bulbs and possibly paint lower grill black / No
7. az3579 / Oil change
1. DW77 / Replace Vortex Disipator / No
2. Stu / Front Mount Intercooler / No
3. OLI77 / Replace rear view mirror with dimming one, and recharge my flux capacitor/ No
4. holyc0w / Replace upper/lower intakes boots, f-connector, IACV grommet and vacuum hose connector if needed, clean IACV, and throttle body/ Yes please
5. Newjack / Replace lower intake boot - Clean ICV - Install new washer fluid pump and grommet - Figure out what the heck is wrong with my passenger window - Install Shark Injector / Might need a battery charger for shark install
6. San / replace low beam headlight bulbs and possibly paint lower grill black / No
7. az3579 / Oil change
8. 704sw / drill out broken bolt, check tranny mount nut tightness, reset airbag light / yes if available (for bolt extraction)
Who has the airbag reset tool now!! !?Quote:
Originally Posted by 704sw
Sent from my S8+
Quote:
Originally Posted by danewilson77
I have the software that can clear the light, if that's what you mean...
ExcellentQuote:
Originally Posted by az3579
Sent from my S8+
https://i.ytimg.com/vi/YKUOB8MN4Kc/hqdefault.jpgQuote:
Originally Posted by danewilson77
Sent from my Nexus 5X using Tapatalk
I should probably throw it out there:
I have ISTA-D, ISTA-P, NCS, INPA, WinKFP, and E-Sys, for those who want any particular computer-related services done.
Sent from my Pixel using Tapatalk
If you could just bring the program that'll make my ZHP run like it has 20K miles, that'd be great.Quote:
Originally Posted by az3579
Sent from my S8+
https://media.tenor.com/images/3f59e...705d/tenor.gifQuote:
Originally Posted by danewilson77
:rofl
Does anyone know how to adjust the door hinges?
Have you used the tried and true method?Quote:
Originally Posted by holyc0w
https://i.imgur.com/3dXPZDL.gif
Maybe something like this?Quote:
Originally Posted by BMWCurves
http://www.soyouthinkyoucanwrite.com...r-door-gif.gif
Quote:
Originally Posted by az3579
I think my zhp could benefit from this, as it suffers from the 2.8k RPM stutter... As far as i know, the software has never been updated.
Will you be hanging out for maintenance day?
Still planning to come up and have some time to chat with the mafia and hold some tools.
Had the shop do the radiator and expansion tank while I was out of town.
I installed my strut bar from UUC (thanks Abe; Zhpabe89) and I installed my autodim mirror a while back (thanks msbc721). I will not need any tools.
See you dudes tomorrow at Dane's.
Sounds goodQuote:
Originally Posted by Oli77
:thumbsup
Sent from my S8+