Looka great Charlie! Nice updates Will.
Sent from my SM-G988U using Tapatalk
Printable View
Looka great Charlie! Nice updates Will.
Sent from my SM-G988U using Tapatalk
(Technically, this past Sunday)
Sold it. :(
My 2005 Sedan's had a battery drain issue and something's been up with the GM5 module system, but not the module itself. This past Summer, I had it in to the shop to replace the tie rod ends, and have a general once-over. The mechanic discovered the oil pan's leaking, as is the rear main seal. I don't have the skills, the time, nor the tools to fix those, so I put it up for sale. A mechanic purchased it, with full disclosure. He put it up on a lift and there was no subframe damage.
Let's just say that I sold it for a bunch more than the $1-2K lowballers offered.
Valentine One hardwire kit taken out from my last ZHP was installed into my new ZHP today[emoji57]
https://uploads.tapatalk-cdn.com/202...f4c4e35c43.jpg
https://uploads.tapatalk-cdn.com/202...be3378ab59.jpg
https://uploads.tapatalk-cdn.com/202...2def0c324f.jpg
https://uploads.tapatalk-cdn.com/202...d4886f9ebb.jpg
https://uploads.tapatalk-cdn.com/202...fbcc9c3471.jpg
It's nice being able to reintegrate parts taken from my first ZHP into my second ZHP as well as improving what I will be driving as my additional daily driver car... [emoji41]
Sent from my iPhone 11 Pro Max using Tapatalk Pro
Looks good, Charlie. :thumbup
Clean install Charlie!
With my car stored there isn't much going on, so I'm itching to post even though it's not much. Super busy with school but finally found some time to get started on my toe jig. They're essentially like smart strings, but they're designed only for the E46. Front assembly has 2 pegs that mount into the hood latch, and the rear will reach over the trunk sill and be hose-clamped to the two back hooks in the trunk:
http://www.zhpmafia.com/forums/image...BJRU5ErkJggg==
Attachment 37395
I was only able to mill the pieces that span the width of the car today. Will continue the rest slowly until the spring:
https://lh3.googleusercontent.com/Dp...-no?authuser=0
I also got my spring seat wrench waterjet, and did it out of aluminium so I wouldn't have to paint them. I have to put a bend in it since the adjusters are mounted on the bottom, inside where the spring sits. I was hoping they wouldn't crack if I used a large enough bend radius, but lo and behold they did. So gonna go back and do that in steel instead
Ebay steering wheel wrap.
Mewant brand.https://uploads.tapatalk-cdn.com/202...d973ccd7ca.jpghttps://uploads.tapatalk-cdn.com/202...3184f1b578.jpghttps://uploads.tapatalk-cdn.com/202...a8f3d4c81b.jpg
Sent from my Pixel 2 XL using Tapatalk
It's definitely easier to install as it has more stretch and I just like how grippy it is. I got the real leather for my Z4 and am going over it with another fake leather wrap now. Gonna be fat!
I don't think you'll have any issues with durability or cleanliness, though. And if it fails in 3 years, you can buy another one for $30 lol.