Tony, when purchasing off your site. The software and scanner must be purchased correct? $60 for scanner and $20 for software? Or does the scanner come with the software?
Printable View
Bump to anyone interested.
Hi Tony,
Will the upgraded drivers work with Windows’s 8? Or do I need Windows 10?
I don’t mind re-purchasing your product. I bought two back in 2018-19. I misplaced the first purchase.
I am curious if can use it to code ( make ready state ) my CATS.
Back Story:
Back in 2019, I sent my DME to Jim @ Kassel Performance for a “Performance Tune” shortly after passing CA smog check.
Fast Forward to 2021, my smog check is due. The smog tech said and showed me that the CATS never came to ready. Since the Kassel tune, I have NOT replaced the car battery, nor have I reset anything, nor has it been to any shop / dealer for repairs. I doubt it’s a drive cycle issue. I can only assume the CAT sensors were disabled during Performance Tune flash.
For the last 3~4 weeks I have been trying to get a reply from Jim. Asking if he can check on the DME and re-coded it to read the CATS.
Unfortunately, I have not gotten a reply as to when I can send it in and what the approximate turn-around time is. The ZHP is my daily-driver. I cannot afford
to have it down for the length it takes Jim to reply to an email. I have tried calling Jim, but I get vmail and zero replies.
If you think the PASoft will work. I would like to purchase it and avail of your tech support. I would gladly pay you for the additional work required.
I assume it can be done remotely as long I connect the laptop to vehicle, and have a battery charger connected to keep the battery voltage stable.
If another software is needed. Let me know. I am willing to pay for tech support.
Thank you
Yes it can work on any windows. No it won't program the readiness codes in.
Technically they should've tuned it correctly for the readiness codes. I'm not sure if there is a better shop to take it to regarding your situation.
Sent from my Pixel 4 XL using Tapatalk
Bump for the holidays and having one just in case of issues with snow or cold weather :)
I sent you a couple pm's without a response, so I'll try here.
I purchased your cable a couple years ago and you provided me the link to the software. That laptop is now dead and I now want to download the software to another laptop and use the same cable, are you able to provide a link to the software again? The link previously provided no longer works.
thanks