2012 SIGFest Tools list: need/have...

I just thought with all the planned maintenance, we should get an idea of the expected tools to be available. Or what is needed by everyone.

MAINTENANCE INFO

Name - Maint Item

2. Whitexi - May do the cooling system again if not done before the trip, may also bring a window regulator for each door
3. Jayjay_dee - transmission fluid change and differential fluid too.
4. cakM3 - VANOS seals replacement and anti-rattle kit (could use some help ) / new coils-spark plugs / rolling fenders if available
5. static667 - REVISED 3/02/12: LCABs, tie rod ends, VANOS, and maybe a sunroof fix. BP will be doing some code work in there somewhere.
6. az3579 - Depending on what breaks between now and then
7: chad44- maybe clutch/flywheel upgrade or coil overs... Only time will tell.
8. yousharenow- Front LCAB's (wiill we have the tools to do this?), Fuel filter ,Micro filter, Brake Fluid Flush. Maybe a head cover gasket
9. Zell- New rotors on all 4/sandpaper brake pads to be flat (they're already basically new, no reason to buy new brake pads), entire cooling system, and if there is time, steering guibo.
10. Mtnman-BP has to recode my car for halogen lights as high beams. (oh yeah, bp, wanna help me?) also wrench for hire for vanos/lcabs/suspension/etc
11. rvariverguy - RTABs, computer flashing, small dent/paint repair?
12. joelshow - rear brake pads and rotors...if I bring the parts can someone help with the install?
13. iZHP - Sunroof shade, and a few other small fixes.

Tools available

1. Chad44: RTAB bushing removal/install kit
2. Fender Roller, 1 low profile jack, 1 regular jack, 2 jack stands, 2 Rhino ramps, and all my tools will be available. I additionally have my archaeic method for tranny and diff fluid changes (Tygon hoses and funnels). If someone wants to bring pump....that would be awesome. We will also need several jacks/jackstands, tool bags.

Sent from Tapatalk

MAINTENANCE INFO

Name - Maint Item

2. Whitexi - May do the cooling system again if not done before the trip, may also bring a window regulator for each door
3. Jayjay_dee - transmission fluid change and differential fluid too.
4. cakM3 - VANOS seals replacement and anti-rattle kit (could use some help ) / new coils-spark plugs / rolling fenders if available
5. static667 - REVISED 3/02/12: LCABs, tie rod ends, VANOS, and maybe a sunroof fix. BP will be doing some code work in there somewhere.
6. az3579 - Depending on what breaks between now and then
7: chad44- maybe clutch/flywheel upgrade or coil overs... Only time will tell.
8. yousharenow- Front LCAB's (wiill we have the tools to do this?), Fuel filter ,Micro filter, Brake Fluid Flush. Maybe a head cover gasket
9. Zell- New rotors on all 4/sandpaper brake pads to be flat (they're already basically new, no reason to buy new brake pads), entire cooling system, and if there is time, steering guibo.
10. Mtnman-BP has to recode my car for halogen lights as high beams. (oh yeah, bp, wanna help me?) also wrench for hire for vanos/lcabs/suspension/etc
11. rvariverguy - RTABs, computer flashing, small dent/paint repair?
12. joelshow - rear brake pads and rotors...if I bring the parts can someone help with the install?
13. iZHP - Sunroof shade, and a few other small fixes.

Tools available

1. Chad44: RTAB bushing removal/install kit
2. DW77 - Fender Roller, 1 low profile jack, 1 regular jack, 2 jack stands, 2 Rhino ramps, and all my tools will be available. I additionally have my archaeic method for tranny and diff fluid changes (Tygon hoses and funnels). If someone wants to bring pump....that would be awesome. We will also need several jacks/jackstands, tool bags.
3. BP - Coding capability.

Updated some of my tools...

MAINTENANCE INFO

Name - Maint Item

2. Whitexi - May do the cooling system again if not done before the trip, may also bring a window regulator for each door
3. Jayjay_dee - transmission fluid change and differential fluid too.
4. cakM3 - VANOS seals replacement and anti-rattle kit (could use some help ) / new coils-spark plugs / rolling fenders if available
5. static667 - REVISED 3/02/12: LCABs, tie rod ends, VANOS, and maybe a sunroof fix. BP will be doing some code work in there somewhere.
6. az3579 - Depending on what breaks between now and then
7: chad44- maybe clutch/flywheel upgrade or coil overs... Only time will tell.
8. yousharenow- Front LCAB's (wiill we have the tools to do this?), Fuel filter ,Micro filter, Brake Fluid Flush. Maybe a head cover gasket
9. Zell- New rotors on all 4/sandpaper brake pads to be flat (they're already basically new, no reason to buy new brake pads), entire cooling system, and if there is time, steering guibo.
10. Mtnman-BP has to recode my car for halogen lights as high beams. (oh yeah, bp, wanna help me?) also wrench for hire for vanos/lcabs/suspension/etc
11. rvariverguy - RTABs, computer flashing, small dent/paint repair?
12. joelshow - rear brake pads and rotors...if I bring the parts can someone help with the install?
13. iZHP - Sunroof shade, and a few other small fixes.

Tools available

1. Chad44: RTAB bushing removal/install kit, 4 low profile jacks(w/built in stand), 2 fluids pumps(one for trans, one for diff), brake system power bleeder w/ BMW adapter.
2. DW77 - Fender Roller, 1 low profile jack, 1 regular jack, 2 jack stands, 2 Rhino ramps, and all my tools will be available. We will also need several jacks/jackstands, tool bags.
3. BP - Coding capability.




Sent from Tapatalk

Perfect Chad.

I've got two tool bags full of stuff I've used to do anything and everything for my car I'll bring.

Quote:

---

Originally Posted by R0B

I've got two tool bags full of stuff I've used to do anything and everything for my car I'll bring.

---

OK. Great.

Sent from SIGFest-2012, USA on HTC via TTv2

Bump! Don't forget to pack your tools everyone! Due to space confinement, I may only be able to bring 2 jacks, but I'm not planning to do any work anymore, so it should be okay.


Sent from Tapatalk

DW- did I read somewhere that you have a 46mm socket for doing the front wheel bearings? If so, I may actually do those while down there.


Sent from Tapatalk

Quote:

---

Originally Posted by Chad44

DW- did I read somewhere that you have a 46mm socket for doing the front wheel bearings? If so, I may actually do those while down there.


Sent from Tapatalk

---

I have the set and a large torque wrench.

Delivered from SIGFest USA

I'm going to bring my tool bag along with my torx bits and brake bleeder. I have a jack pad adapter from ECS as well.