So you have the whole fleet there now?
Printable View
Imo, there isn't any room back in that area for anything of any substantial dimension height-wise. It's pretty tight and I didn't want to put any additional pressure on the glass and louver, just create a low friction surface.
See my previous post for the link to the type of tape I used.
Fixed the link in my post. Here it is again, more than enough for this project plus wherever else anyone could find a use for it
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Moved my plate to side. Used a US Mill works bracket, pricey but good quality.
Bumper strip from FCP came in its usual packaging, also had to order the r/l bumper strips since they dont match at all from 15 years of road exposurehttps://uploads.tapatalk-cdn.com/201...36d290da27.jpghttps://uploads.tapatalk-cdn.com/201...36009a14d1.jpg
Sent from my SM-G973U using Tapatalk
Replaced the display in the mini, any hint of heat and the display disappeared. Had to get in to it much deeper than I thought but at least I wasn’t laying on the floor!
https://uploads.tapatalk-cdn.com/201...774c51da80.jpg
https://uploads.tapatalk-cdn.com/201...c1aa9bc745.jpg
https://uploads.tapatalk-cdn.com/201...a65ef584a0.jpg
It was a little tedious swapping the LCD but not too bad. I watched a few YouTube videos to familiarize myself with the process. So nice to have a working display again!
https://uploads.tapatalk-cdn.com/201...2ae6df74ea.jpg
https://uploads.tapatalk-cdn.com/201...579cd0486d.jpg