Anyone have a recommendation for a good set of headlight halos? I’ll pay a premium for build quality
Printable View
Anyone have a recommendation for a good set of headlight halos? I’ll pay a premium for build quality
Seems to be a trend on IG atm, what style were you looking for? I’ve seen the E9X style where the angel eyes have a “3D effect” & then there’s the traditional style E46 angel eyes that come in 3 variants. LED, LED “cotton” angel eyes, and then cotton “switch back” angel eyes that glow yellow when the blinker is in use.
Sent from my iPhone using Tapatalk
Jacob, if you want the best looking angel eyes for your sick ride then Umnitza Orion V4 LED Angel Eyes is the way to go. I have used these on my ZHP and M3 and won't use anything else. They really accent the looks of the BMW and with your car would look absolutely sick!
https://live.staticflickr.com/65535/...1c813a4a_k.jpg
Here is the link:
https://www.umnitza.com/angel-eyes-b...6-e65-e38.html
I approve of this recommendation. [emoji1690]
https://uploads.tapatalk-cdn.com/202...fb66a1590f.jpg
Looking for something more traditional that fits the car, unless they make halos that you can change to any of 100 different colors with my cell phone lol
Charlie: I’ll look into those, thanks.
At this point I’m looking for whatever small little mods I haven’t done yet because the looming two big mods are a built set of RS2 wheels or a supercharger
I personally think the EAS Aurora's were the best angels for the E46. But they are NLA. Followed by WeissLicht (also NLA) For the Orions, the quality of the ring/kit is very good. But I'm turned off by the 6500K-7000K color of the LEDs. I prefer the 5500K-6000K ones.
You could probably get a set you like off Amazon. Most of the SMD LED rings with 120 LEDs are copies of my original design. I was contracted by some vendor in Australia to design some for them, then they sent it to China (which I told him it would be a mistake) and then I saw them pop up everywhere :rofl
I would stay away from the COB LED ones though. Although they have a more uniform look, they are very bad with heat, so they are more likely to fail often.
I’ve heard good things about Morimotos RGB angel eyes, I personally used angeleyeguy’s angel eyes on Instagram, I bought the cotton led’s & the normal led ones. I love them.
Great quality & fit with no issues besides moving the sliding bracket on the xenon projector to the middle when reinstalling the black bezel, which is just a trial and error thing when reinstalling.
https://uploads.tapatalk-cdn.com/202...55c6fa00d9.jpg
Here’s a while back when I had blacked out housings, cotton angel eyes & Lamin-X yellow film on my headlights and fogs.
Sent from my iPhone using Tapatalk
regarding a CSL brake rotor upgrade in the front: does anyone know if I need any other components swapped out besides the carrier bracket and the rotor itself? do I need different dust shields or anything?
In unrelated news: scheduling with my indy for installing Umnitza V4s and a full oil change service
a few of these super clean e30s that have been floating around as of late had me reminiscing. I need to get some similar pictures taken with the ZHP/mask:
http://farm8.staticflickr.com/7136/7...6c17d682_c.jpg
http://farm8.staticflickr.com/7088/6...26032639_c.jpg
For sure. Always loved that pic.
Sent from my SM-G988U using Tapatalk