Printable View
Hi All -
A shop told me I have max negative camber on the right front tire. I had the shocks replaced with bilsteins, these are the pictures from the shock tower, that right side looks off to me. Any ideas on what caused this? Not Sure if the shock just needs repositioned or what suspension component could be causing such a symptom.
Attachment 39262
Did the shop do an alignment after getting them replaced? You can adjust camber by loosening the 3 tophat nuts and sliding in/out with the car in the air
Sent from my SM-G781W using Tapatalk
Here's a video on how to use the camber tool on our cars.
https://www.youtube.com/watch?v=-qoKjbSVFVg
Just needs an alignment. They will loosen and pull it back towards the outside of the car to get it to the correct spec.
I have the same problem. I'm at max camber on the left side, but it's matched with the right side.
This happened after I replaced my front struts. I'm not sure how best to proceed, if anyone has any clues.