Yeah, probably best to just find mint sport or M3 seats, much cheaper than new hide
Printable View
Yeah, probably best to just find mint sport or M3 seats, much cheaper than new hide
This.
I'm not sure the difference in these versions of SCHWARTZ Montana leather
https://www.realoem.com/bmw/enUS/sho...diagId=52_2574
Bottom:
For vehicles with
Leather Montana/basic equip/schwarz
N6SW=Yes
03 Seat cover leather left SCHWARZ 1 52108255537 $581.55
03 Seat cover leather right SCHWARZ 1 52108255538 $581.55
Top:
For vehicles with
Leather Montana/basic equip/schwarz
N6SW=Yes
04 Cover backrest leather left SCHWARZ 1 52108255547 $695.57
04 Cover backrest leather right SCHWARZ 1 52108255548 $695.57
Attachment 37421
Hey mafia - I’m talking to the dealer for this specimen:https://www.adiautosport.com/invento...s-330ci/291422
Anyone inspect it? Dealer mentioned someone has a PPI report- is it you?
Just moved into a new place and the parking garage entrance/exit has a major lip and downwards slant. Front bumper clearance is surprisingly fine but I keep bottoming out on the undercarriage. Not a great sound.
I’ve tried to go at it at multiple angles and i can’t seem to get around it, any advice? Maybe something to throw on the lip to roll over?
Sent from my iPhone using Tapatalk
I thought about this when I read your question.
http://www.zhpmafia.com/forums/showt...420-Rub-me-Not
I've got a random one about leaks and vapor barriers.
So, in the time of my ownership i've come across two locations for water pooling, originally the front passenger side footwell and more recently the rear passenger footwell. Originally when I asked about the front I was told to check out the sunroof drain going down the A-pillar. However neither the A-pillar nor dashboard or anywhere else was wet. It was at this point where the ZHP was put into the garage for most of the year (only to come out a couple of weeks ago), so I never really investigated the front. However I notice the other day after some rain that there was a damp spot in the rear.
Some of you know that I've been doing a two tone interior so I figured before I button up the doors, I'd check the front vapor barriers for any leaks. I took my roll of butyl tape and literally went around the whole barrier and sealed it up along with holes that had wires coming out of them. I wanted to do the fronts first because I didn't want to worry about working around the airbags once the battery was back in. When I took of the front door panel, I saw that the part of the door closer to the hinge had beads of moisture on it. Could that be the source of the leak up front? I read somewhere that the windshield cowl could also attribute to interior leaks. I haven't replaced mine yet but if I find more water up front, should I look to do that?
Also regarding that rear puddle, i'll be doing the butyl on the rear VB tomorrow. Any other area I should look at?