Originally Posted by
Stigissimo
Lol - it's a Harbor Freight impact gun :ninja that being said it is very well reviewed and I love it. I used it to do the pulling/pressing with the press tool I sketchyrigged up from a 3-jaw puller bolt, a series of washers, a 4" PVC pipe, and pipe floor flanges.
I've got the driver's side bearing back in the hub, and need to do passenger side. Then it's just pressing the hubs back in (which required dremeling the old inner bearing race that was stuck on the hub) as well as the axles. I had to drop the exhaust and remove the sway bar as well. Then it's just reassembly.