Eli, what size wheel and tire is on your car in your sig pic?
Printable View
Eli, what size wheel and tire is on your car in your sig pic?
Post #4 has all the specs
http://www.zhpmafia.com/forums/showt...ver-Grey-Sedan!
I never said you were calling anyone a liar. What I said was that you were making assumptions on people's knowledge and experience with the subject being discussed. If you had asked me, I would have been happy to share my personal experiences with what I have seen fit & not fit on E46 sedans.
I have 18" ET42 with 245's on the rear. I can maybe get a 5mm spacer back there.
I have 18" ET42 with 225's on front. I can maybe get a 5mm spacer up there.
Or else I will rub.
The reason's this is...is:
1. I could have chose a tire with a more rounded sidewall. I have Hankook's
2. I am lowered pretty low.
3. I could have chosen a rim with a different offset.
Based on my experience.
Now.....where I would use the calculator is if I wanted to move to a rim with a different offset.
I am currently running 18x9.5 et40 rear, et 35 up front.... from exp. with a 9.5 wheel you will need et35 or lower to clear the strut...my fenders are not rolled and i am running 255/35/18s im lowered on megan racing springs at about 1.5 - 1.75 inches.
http://farm6.static.flickr.com/5213/...9034184a_z.jpg
http://farm6.static.flickr.com/5251/...756a499f_z.jpg
and to help out. I have seen 18 x 10 et 25 squared on an e46 sedan. with money and time. you can make anything fit.
What wheels are those and are you running camber plates?
Looks great!
Ian
Miro 111s
and Nope No camber plates, adjusted the camber using the stock slots for my struts. Had to drill out the nipple that was there... took all of 10 minutes.
Good data skr...
Sent from my Droid using Tapatalk