Replacing ZKW bi-xenon with Magneti Marelli (aka AL) headlight assembly
Quote:
Originally Posted by
holyc0w
That's the main takeaway. First part is to make sure the headlight portion is seated properly.
There's not much to do here. The headlight assembly slides in and is secured by 4 screws (two on top and two underneath the headlight lens)... the corner light should fit once the headlight assembly has been secured.
Of course you can keep the four screws loose on the headlight assembly, slide the corner light in place then tighten the four screws on the headlight assembly to secure it and then take out the corner light so you can reinstall the lower headlight trim back in place and then reinstall the corner light again.
I myself have never had to do it any other way than slide in the headlight assembly and secure the four screws, reinsert the lower headlight trim and then slide in the corner light and secure it.
This is a relatively simple process in my opinion...
Sent from my iPhone 11 Pro Max using Tapatalk Pro