Yes .... Yes, I am!!Quote:
Originally Posted by johnrando
Printable View
Yes .... Yes, I am!!Quote:
Originally Posted by johnrando
:roflQuote:
Originally Posted by elric
I have:
15" 1/2"-drive Wobble Breaker Bar
Craftsman Universal Tool Set (will cover anything on the car basically), 3/8"-drive + wrenches
3x Wheel Chocks
8mm Hex Socket, 3/8"-drive (good for belts)
16mm 1/2" in. Deep Socket
T50 Torx Socket 3/8" (good for belts)
T25 Torx Socket 3/8" (good for removing pillars)
3/8"-drive 10-80 ft. lbs Torque Wrench (basically new)
2x Rhino Ramps (will be too high for ZHPs, but can be used with wheels on longitudinally-placed 2x4's)
Complete sunshade repair kit, inc. sunshade (parts for this can be purchased from me, but at a significant Mafia discount :) Or beer. Beer is a welcome trade.)
I have already done my entire cooling system, and I no longer plan on doing my steering guibo.
My only maintenance item is:
Change all four brake rotors, refinish brake pads by sanding on a glass surface with 140-grit sandpaper