I replaced the rubber body plugs under the back seat carpet.... Since mine were missing. That was great to find out. Gonna pull the front fender liners halfway out and clean all the debris out from...
Type: Posts; User: Thatguy_JZ
I replaced the rubber body plugs under the back seat carpet.... Since mine were missing. That was great to find out. Gonna pull the front fender liners halfway out and clean all the debris out from...
Thanks!!
Also got my M door sills delivered from the UK today.
https://i.ibb.co/1X69ZGK/IMG-20200516-151147.jpg
Sent from my Pixel 3a using Tapatalk
Yessir
Sent from my Pixel 3a using Tapatalk
Bled my brakes with ATE and threw on my other wheels. Apex Arc 8 17x8.5 with 245/40/17 square. Just got the red caps too.
https://i.ibb.co/RzB7kDX/IMG-20200510-160334-01.jpg
Sent from my Pixel...
Those look pretty good honestly.
Sent from my Pixel 3a using Tapatalk
Lol, I went back and forth on this myself. My car came equipped with black leather. But I did the armrest, boots, headliner and pillars all in black suede/Alcantara. I finally got my new steering...
Have you done Rear Trailing Arm bushings? If original they need done. It'll make the ass of your car feel like it's caught in a crosswind. Worse in the rain or certain highways that have channeling...
Thanks everyone.
They're a big body shop brand I got from a local detail supplier. Allura is the name. I've had em for a while now and I had good results with my Porter Cable and the Black IS300...
After a year of ownership I finally got around to fully detailing the exterior of my car. It was a 2 day process. Clay Mitt, Medium Cut, Finishing Polish, and 2 coats of Gyeon Ceramic Can Coat.
...
Put in a new fuel pump today. Cleaned years of junk out from under the rear seat
I've got brass clutch pedal bushings and poly brake pedal bushings waiting for install. Also still need to get around to doing my diff swap and bushings. I have everything I need now.
Currently...
Picked up a 26mm M3 Front Swaybar and 20mm Xi Rear Swaybar today on the cheap.
Ordered Hotchkis Front endlinks to make up for the difference in bar angle up front and new OE rubber bushings for...
I think I fixed or improved my skipping drivers side wiper by tweaking the wiper arm angle where the blade attaches.
I also had a lower headlight trim piece that never would clip into the fender...
I know right. Kind of a shame. Not even wrecked. 200k+ miles. But something was off with it and the guy already pulled the engine and has it sitting over on the shop floor. He hasn't bothered to do...
I have the brake ducts. I was unaware the wheel liners were different.
Color is Imola Red.
Front bumper will need resprayed due to paint cracking in various areas and the lower splitters...
I found a slick top Imola auto ZHP sedan for parts that I'm going to tear down.
Got the black cube trim and OEM Mtech2 front bumper yesterday.
Going back for the rear bumper, sides, maybe...
Thanks. Powder coat was $100 per wheel. $75 per wheel to straighten any bends.
You should drain the diff when doing seals. All the fluid will spill out otherwise and make a huge mess.
https://i.ibb.co/L0W6z5M/IMG-20191017-192417.jpg
Pulled a 3.38 from a wrecked 330Ci automatic a few weeks ago to install in my 6spd ZHP.
I ordered new output shafts seals and a finned diff...
I was gonna do some Angel Eyes but ultimately decided against it. Instead I took the opportunity to replace my headlamp gaskets since I had moisture issues in one headlamp. Anyone wanna buy my like...
I swear no matter what they all seem to seep.
In other news - Installed a full set of DEPO clears with stealth turn signal bulbs. Fitment is good with everything except the sidemarkers which...