Same as any other 330, I can't imagine they're different than a 325 or 320 either. Can probably be picked up pretty cheap at the local u-pull it or from a local partout
Type: Posts; User: t.er
Same as any other 330, I can't imagine they're different than a 325 or 320 either. Can probably be picked up pretty cheap at the local u-pull it or from a local partout
Fixed it for you (I kid, I kid) - but yeah, no kidding about heat. I remember talking with a guy about his build and he had two oil coolers, each of them pulling air from the two smaller grilles on...
Spirit R is the ultimate RX7 from factory but so expensive - some day I'd love to own even just a regular Series 8 FD, in Innocent Blue. The 99 spec front end just looks so much better than the...
Man, I think Estoril has got to be my favourite colour on these cars... well actually, hard to decide between that and Imola.
I did notice it seems like the body shop did not take their time with...
And you can just tell I'm a nerd because of this video:
https://www.youtube.com/watch?v=P5lu-dq7agI
tl;dw: Basically the greater the mass is of ice, the longer it takes to melt, because the...
Honestly, this year has been a very mild winter. I've been home for the Christmas break, and am still at home because school is closed. And I haven't had to shovel snow even once
I'd definitely consider an aftermarket one. Reason is because you need the entire subframe assembly from the M3, along with the driveshaft I believe. That will get you the M3 LSD for about $1000 but...
Yeah, if having an LSD compromised NVH beyond acceptable levels of a DD then not many road cars would have them. It's possible you may feel/hear it if you get an aftermarket diff geared (...haha)...
you know you live somewhere with a lot of snow when you have trouble checking for traffic when you're backing out of your driveway. Because the pile of snow adjacent to your driveway is taller than...
Hahaha that's sweet! And the one thing I miss about storing my car for winter nowadays. I didn't know you guys got that much snow down there!
Ugh. All the mistakes the previous mechanic made are why I do my own work. I had a similar experience - when I got my Redish RACP plates welded in, I elected to have the shop replace the subframe...
As featured on Misha's channel!
https://www.youtube.com/watch?v=Ljx2BW8bG_Q
I'm going to guess another 7,500 km. I don't recall the exact mileage on my car when I stored it but it was around 343,000 to 343,200 km or so. That should put me just over 350,000 km at the end of...
Welcome back and sorry to hear about your troubles. Out of curiosity how much is shipping to and from HI? Also I'd imagine there's some pretty great roads there!
I try and torque most of the bolts on my car that have a torque spec but honestly, it's too much hassle with the strut shaft nut to do it "right". Heck, even in the official install instructions by...
I remember, we had this conversation! Depending on the job situation I may be moving somewhere without snow after I'm done my Master's. Then I can drive my car year-round!
Super jealous of the weather where y'all are. My car has been sitting under a car cover in my parent's garage for a few months now
Along with a B30 swap. Looooool definitely spiraled into a proper project instead of just a beater runabout
Man, that's looking real sharp! I can't decide whether Estoril or Imola is my favourite colour on these cars (but Mystic isn't bad either).
Interesting how they painted the trunk key hole and the...
A proper RACP reinforcement if you're going to be tracking a lot (so not just plates but also a solution that adds an additional loadpath from the subframe hardpoints to the chassis rail), proper...
I personally haven't been keeping track down to the minute but mine feels like it's around 5-10 minutes for coolant. Oil takes much longer, around 15-20 minutes.
[FONT=Verdana]
Huh, that's an...
Nice! Is the Triumph a car you'll have for life? I hope my ZHP goes the same way. God forbid some guy runs into me, or a natural disaster takes it out
I love those seats! Hate how much I slide around in the stockers
Nuuuuuuuuuu Sreten come back!
Perhaps the dealer didn't see that the nuts extend downwards? How many turns of thread engagement are there? If the stud is short, it could look deceiving while still being okay because of how the...