Search:

Type: Posts; User: racer2086

Page 1 of 5 1 2 3 4

Search: Search took 0.00 seconds.

  1. 3 bent wheels; can they be successfully straightened?

    Hey guys. Few questions. Car is still pretty new to me, so just found this out. Went to get the front tires balanced due to a shake above 80mph.

    As soon as he put it on the balancer, the balance...
  2. Replies
    8
    Views
    377

    6 month old Post, but how did it turn out? About...

    6 month old Post, but how did it turn out? About to do this myself.
  3. Wanted to update this. I smoke tested the car...

    Wanted to update this.

    I smoke tested the car and replaced all 6 coils with Delphi coils. Below is a pic of #5 and #6 original Bosch coils. While I never would have said the car wasn't smooth...
  4. What if my monitor doesn't even work? Like I...

    What if my monitor doesn't even work? Like I can't even access the TPMS menu in INPA. Which it seems others have no problem accessing. Is this a software version issue? Can updated software be...
  5. Well, I performed this retrofit according to the...

    Well, I performed this retrofit according to the instructions on page 1, but I never read past that until now, which I wish I did. I would have realized my car has the CI12 module and this was all a...
  6. Ok so have my button pod and the SB should be...

    Ok so have my button pod and the SB should be here soon to get wired up.

    I read through this whole thing, and kept asking myself...besides the LED, why can't I use the standard output of the sport...
  7. Replies
    12
    Views
    287

    Do I have to bleed the line if removed? I imagine...

    Do I have to bleed the line if removed? I imagine some air will get in there no matter how hard you try. Does it self bleed or something?
  8. Replies
    4
    Views
    889

    That car was listed for sale back when I was...

    That car was listed for sale back when I was looking. It's been for sale for months. I can't remember why I wasn't interested in it. Probably because of the northeast salt.
  9. Replies
    12
    Views
    287

    This is kinda what I'm wondering. Is it worn and...

    This is kinda what I'm wondering. Is it worn and out of room for adjustment?

    How hard is it to delete the CDV? Do you have to bleed the system after?
  10. Replies
    12
    Views
    287

    Clutch Feel and Engagement Point

    Still pretty new to my car. It's got almost 112k now.

    After driving it for a bit and then going into some other manual cars, I've noticed some differences and I'd like to know if they are...
  11. Replies
    16
    Views
    588

    WHOA! :eyetwitch That's a long drive!

    WHOA! :eyetwitch That's a long drive!
  12. Replies
    6
    Views
    180

    Good post. I was reading up on this a few weeks...

    Good post. I was reading up on this a few weeks ago. I ended up giving up, because I was reading on some of the sites that they weren't compatible with Harmon Kardon? Also not sure on the quality....
  13. Replies
    15
    Views
    724

    I got a quality OTC leak down tester off Amazon...

    I got a quality OTC leak down tester off Amazon for around $60. Proved to me that the cold engine miss in my family's 90 Cadillac wasn't a mechanical issue. Almost zero leak down on the cylinder with...
  14. Replies
    16
    Views
    588

    Nice car. How far of a drive are you making? :) ...

    Nice car. How far of a drive are you making? :) That's one good way to bond with it...I enjoyed mine 11 hours home.
  15. Can anyone tell me how much of a difference the...

    Can anyone tell me how much of a difference the auto vs manual sensitivity is? Will the car be too jumpy with the manual trans version?
  16. Replies
    7
    Views
    213

    Does it follow the frequency of rotation of the...

    Does it follow the frequency of rotation of the wheels/driveshaft? I would be suspecting a wheel bearing or driveshaft CV joint or center bearing.
  17. Replies
    15
    Views
    724

    Man I was going to suggest all new coils. ...

    Man I was going to suggest all new coils.

    Assuming everything else is good, what about a little extra carbon build up in that cylinder that is causing a hot spot, throwing the DME into a fit?
    ...
  18. Replies
    3,441
    Views
    261,177

    https://live.staticflickr.com/7832/46849899194_3fb...

    https://live.staticflickr.com/7832/46849899194_3fbcbb8c39_b.jpg
  19. Replies
    15
    Views
    724

    Oh, so you solved your problem. And it was...

    Oh, so you solved your problem. And it was electrical related (or so you think) to that bad wiring repair. Interesting.
  20. Just drove home on lunch with MAF unplugged. Car...

    Just drove home on lunch with MAF unplugged. Car seems to run the same. Maybe a hair better? The idle seems a little more stable, and the misfiring is still there at 3k, but maybe not as bad, but...
  21. Ok so a month later and I finally have some...

    Ok so a month later and I finally have some updates. I had INPA hooked up to the car for some other stuff and took a look at the DME. The fuel adaptations are way off. Bank 1 and Bank 2 are 99.xx...
  22. Replies
    15
    Views
    724

    Edit: just read your E46F post. 144k miles. ...

    Edit: just read your E46F post. 144k miles.

    How about a leak down test?

    Possible valve float going on at that high RPM due to a weak valve spring?

    Very coincidental about the clutch...
  23. Replies
    16
    Views
    588

    Wow goes to show you have to see the car in...

    Wow goes to show you have to see the car in person, or like you say get a PPI. I must have gotten real lucky with my car...not perfect, but not repainted and not a mess either.
  24. Does this require a new rear deck trim piece, as...

    Does this require a new rear deck trim piece, as it does in E38 and E39 vehicles? If so, are any of those trim pieces included?
  25. Replies
    10
    Views
    417

    Interested. Does it come with the stuff to mount...

    Interested. Does it come with the stuff to mount it?
Results 1 to 25 of 112
Page 1 of 5 1 2 3 4