Not personally. Every headliner diy I read was adamant about not using it so I shared the note here. Apparently it doesn't withstand overhead applications or the extreme heat a headliner sees.
Type: Posts; User: zj96sc
Not personally. Every headliner diy I read was adamant about not using it so I shared the note here. Apparently it doesn't withstand overhead applications or the extreme heat a headliner sees.
Could. I used that stuff on an e30 decklid a decade ago doing an interior color conversion. It worked, looked ok, but came out pretty crusty feeling. Maybe I didn't do it right.
hello community!
since i was last here, we've added two munchkins to the roster, picked up a subaru outback for the wife, and i replaced my extended cab 7.3 with a crew cab 7.3.
two kids took...
i still exist. guess i swing around every 3-4 years?
zhp still pounding pavement.
working a headliner refurb and A/B/C pillars. pics to follow...
located OTP north.
lingering issue i hadn't gotten around to - broke the passenger side airbag retaining clip when doing the condenser. connector isn't available anymore from BMW except as a part of a $70 airbag...
picked up a bimmian cell phone bracket - and caseco 360 mount - based on prevailing popular opinion here and on E46F. found the bimmian bracket fit to be OK, but obviously built for larger cradle...
time for a new belt?
http://i.imgur.com/bNx5fzN.jpg
so my armrest has looked like this since purchase:
http://i.imgur.com/Z1NLivx.jpg
Didn't want alcantara for a frequent skin contact...
thanks all.
mileage at 123k, purchased at 92k in 2011, so surprisingly only about 30k in 5 years. quite a bit lower than i thought. wife's car pulls most road trip duty and also split my mileage...
hey dudes! 4 years no talk. hope all is well.
still racking miles on the ZHP. no mods of any interest or significance in these 4 years. I think one window regulator in that time.
had a...
Recommend you avoid grease in this application, and be very sparing on the anti-seize, hi temp if you can get your hands on it. Heat from the brakes will flow the grease right out and onto your...
Headlight gaps to the hood/quarter and bumper gaps to the headlights are both off. Suspect considerable frontal impact if headlights were adjusted (or hood). Also has obviously seen a polisher...
To me it elevates the sound stage - i'm not sure if it does it by putting a light delay on the closer speakers or what, but I think it moves the effective acoustic center closer to your head area.
...
1. Dave_B (2) Hoodies and/or (2) shirts
2. danewilson77 (1) hoodie, (1) shirt, (1) kick ass ZHP keychain.
3. johnrando (1) ZHP keychain. If more buyers needed, I'd be in for a hoodie, but I have a...
Nice. You're building a twin. I think silbergrau sedans look sharp with oem black trim and ambers, but I guess I'm a little biased.
You can definitely drive up to the Zentrum and take pics even if its closed, unless things have changed:
http://i81.photobucket.com/albums/j234/paulkeith/cars/TIAG_ZHP/DSC_0446Large.jpg
I think...
I'm 100% mig...but good call. some hangers for my grinder and cut off wheels flap wheels grinder wheels wire cups etc are on the list. I thought about doing it tonight but I've slowly learned to just...
Thanks! Not worried about any rust that's going to form in the garage. Light coat of WD40 and it won't be going anywhere. All of that steel still has mill scale and flash rusted years ago and got...
I needed a welding table.
.....so I built one.
all 2"x2" square tubing, top is two layers 1/4" sheet. All reclaimed from my scraps pile so total cost right now is $0.00.
My dad claimed my...
I actually drove through franklin about an hour after you made this post. Oh well....looks like you got some volunteers.
Good luck.
This is why most production offerings are built with some adjustability...or at least slotted holes....even between not previously reworked chassiseses I'd bet there is enough variation that just...
Understood.
Thanks for the heads up.
Yeah, I'm not sure I understand their inherent coupling of the SIG to the mafia. Is there a BB for every SIG CCA recognizes?
nice work dude. that metalizer turned out amazing. I am in love with plastidip. I use it like frank's redhot.
solded.