That did it! Was worried it would be much more involved with the wiper motor and electronics. Thanks
Type: Posts; User: nsk040
That did it! Was worried it would be much more involved with the wiper motor and electronics. Thanks
I took my wiper arms of recently to clean out the windshield cowl area and put them back on. Now when it's raining my wiper arms seem to stop about 2 inches earlier than they should in their range...
Assuming the new shocks are the same as the old, the difference you feel may have to do with alignment changes from the job. Shocks don't settle.
All these OEM bushings are good per the shop (salt-free car may help), but I was thinking about doing it anyway for peace of mind. May even weld in the reinforcement plates as it's easy to do with...
Weird buzzing noise. Please help me identify.
Driving down the road at anything above 15mph seems to produce a buzzing noise from the rear decklid area. The noise isn’t constant, but it...
Anyone done this? My remote unlock is working at increasingly shorter distances, if I don't replace the battery will the ignition stop working as the key is matched to the ignition?
I had a rattle (maybe best described as plastic on plastic sound?) that is mostly heard when driving on rougher street surfaces. For a while I thought the noise was somewhere in the passenger door,...
Is a special tool needed to replace this part? DIYs on the internet that I've seen say no, but I recall there being a special tool (perhaps to get the wipers off)? It's a sedan, if that makes a...
Charlotte, NC
C-Pillar covers:
http://www.zhpmafia.com/forums/showthread.php?22205-C-Pillars-(Left-and-Right)
I bought some new C-Pillars so these are available. There was some bubbling/sagging about a year ago so I tried partially peeling back the covering and then re-gluing with the 3m adhesive spray. ...
Dumb question - If I go clear on the fronts, is it considered mis-matched to still have yellow lenses on the back?
It's an 04 sedan.
One has a slight crack, the other has some moisture in it. I'm leaning towards sticking with the yellow color. Any good options aside from OEM for replacements?
Thanks. I double checked all the nuts up front a few months back so, unfortunately, I don't think it's the end links. Was the noise you experienced pretty intermittent?
OEM / Lemforder on FCAs and FCABs.
Hopefully the last noise diagnosis thread for me... I get an occasional pop (could also be described as a soft "crack") from the front left. The noise you get when you tap your knuckle against the...
I'd think the spring rates are sufficiently high that your weight wouldn't cause that much compression from just sitting in the car. Shop could have gotten the ride heights wrong, or perhaps they...
Broken spring, perhaps? Can you upload a video of the noise? You could disconnect the bar and see if the noise remains to start ruling things out.
End links are new and tight.
Noise is 100% coming from the front. Obviously the noise is not the typical sign of a bad wheel bearing, but as pretty much all other potential sources of the noise have been addressed I'm having to...
On a fully refreshed suspension, I'm getting an occasional pop/clink (not sure how best to describe the noise) from the front left. This is usually at parking lot speeds over undulations or turning...
Thanks. Perhaps best to do the three diff bushings by the time the diff is loosened to get the LCAs in.
Has anyone done their LCAs? Curious just how much of a pain the driver's side one is to get in with having to move the diff.
What part of the LCA takes the brunt of the wear - inner bushing, outer bushing, the LCA itself? Not sure that I follow...