Gents (and ladies maybe?), I've decided to sell the ZHP. I'll be moving soon and cannot take a fleet of cars with me. Replacing the ZHP is a '14 Audi S4, a bit more friendly on these snowy Colorado...
Type: Posts; User: AWhiteZHP
Gents (and ladies maybe?), I've decided to sell the ZHP. I'll be moving soon and cannot take a fleet of cars with me. Replacing the ZHP is a '14 Audi S4, a bit more friendly on these snowy Colorado...
As promised, I bought a $40 rack and threw it on the back of the Rolla. Great success. Would've loved to mount bikes on the Bimmer, but I'm half convinced that my bike is cursed and I don't need to...
Glad to hear that you like the feel. Mind me asking what customer service problems you've had? Any idea what actually caused the circlip to break?
And yes, I'm referring to the bar AND rack setup when I mention $500+. I understand how much they cost, but I'm cheap and like deals. I've also gotten burned on a few forum purchases so I've come to...
Whammy, the tires weren't actually rubbing on the fenders but rather the stud that mounts the bumper to the inner fender (the one with the clip that breaks/rusts on every E46. When the rear bumper...
ZHPizza, I'm stoked to hear that you guys have had good look with T6. In a dream world, every vehicle I own would be on a strict (lol-B)rotella diet.
And I should've said that the only helical diff...
Check the lash in the differential and the center support bearing too. If it were me, I would do the following:
1) Put car on jackstands and try to recreate the noise. Have a helper modulate...
Assuming you're referring to the front control arm bushings, it's silly not to replace them in pairs. They're pretty cheap and can be replaced in 30 minutes if you know what you're doing. Part of...
Certainly seems like a failed alternator at face value. But before you replace it, download a free Bentley manual and check all of your grounds. Obviously check connections at the battery and...
Well, I certainly wouldn't call a 9 month update "fashionably late" but here we are!
I'll start off by saying that this has been the best ownership experience I've had. This car is rock solid,...
I’m excited to see how the D treats you. I’ve longed for one of these for quite a while, and when my beater, commuter Corolla dies, I’ll be looking into one as well.
It seems like everybody who goes...
So in other news, I was planning on running the DWS's throughout this winter because of their low temp range. The 235's make for a nice ride without much tramlining but I just couldn't find any...
ZHPizza- I'm interested to see how turner responds to your situation. I was surprised at how freely the monoball can rotate inside of it's housing, but I figure that Turner should have their...
Wow, sorry to hear that man. That’s strange, what were your grease intervals? Did you stick to moly grease? I’d definitely talk to TMS and tell them what’s going on. The design philosophy is direct...
You must grease them during install, and then upon every oil change, per TMS.
Install was easy, I had to use emery cloth on the DS Control arms due so a tacky adhesive where the bushing was...
Thanks for the warm welcome everybody, it is a phenomenal example of a well cared for ZHP.
Straight away, I knew the FCAB's had a good chance of being toast after 40,000 miles on Colorado roads....
Greetings everyone,
This thread will be used to (continue) documenting my recently acquired sedan. Those of you who stalk the forum probably recognize this car, as I had the pleasure of purchasing...