Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP

Search:

Type: Posts; User: DeathTrap

Search: Search took 0.01 seconds.

  1. 3.64 diff is not highway friendly. Still need to...

    3.64 diff is not highway friendly. Still need to code out the EGS and the transmissionhttps://uploads.tapatalk-cdn.com/20200916/4017557fd49c42134a0b807e59815bc0.jpg

    Sent from my Pixel 2 XL using...
  2. I didn't even try to fight it. I took the rear...

    I didn't even try to fight it. I took the rear arms to a shop and had them do it. They ended up breaking the trailing arm trying to get the axle out. I dodged a bullet on that one!

    Sent from my...
  3. Threw in my ZHP cluster this weekend. Love the...

    Threw in my ZHP cluster this weekend. Love the subtle difference that it...
  4. Thanks guys! Now for the final parts. Lifted...

    Thanks guys!

    Now for the final parts. Lifted the transmission up and with some slight maneuvering, it slid nicely into place. At this point, assembly is the opposite of removal. Bled the clutch...
  5. Now we take a break from the transmission work,...

    Now we take a break from the transmission work, and we go to the rear of the car where I have this beauty to be installed. ...
  6. Replaced the leaky shift selector seal and that...

    Replaced the leaky shift selector seal and that shift bushing thing was replaced with a new part. It has a rubber piece inside that wears out and gets sloppy. The old one used nylon washers on the...
  7. I want to change the thread title to Japanrot,...

    I want to change the thread title to Japanrot, gotta get a Mod in here.

    Anyway, flywheel, pressure plate, clutch bolted on. Fairly straightforward. I had a breaker bar on the other end of the...
  8. Alright, it's time to take care of some...

    Alright, it's time to take care of some transmission out only things...like the rear main seal.

    The metal gasket was so stuck to the block, that I almost didn't recognize it. I peeled it off and...
  9. The first drive was really good! I have to take...

    The first drive was really good! I have to take care of a front end knocking and a few leaks, then she will be good mechanically.

    Sent from my Pixel 2 XL using Tapatalk
  10. Now, it's time to remove the steptronic! Got to...

    Now, it's time to remove the steptronic! Got to really use my new ESCO jackstands too. Highly recommend them over the harbor freight ones. I also had aluminum jackpads that fit nicely on the rubber...
  11. Had the pressure plate and flywheel resurfaced...

    Had the pressure plate and flywheel resurfaced and the clutch rebuilt by a local shop. I love the double shear rivets in the rebuilt...
  12. Driveshaft refresh. New CSB and centering...

    Driveshaft refresh. New CSB and centering bushing. Wet toilet paper made quick work in the removal of the bushing. CSB R&R was pretty...
  13. Replaced subframe and diff bushings with new OE...

    Replaced subframe and diff bushings with new OE lemforder parts. Well, the rear diff bushing is Meyle.https://uploads.tapatalk-cdn.com/20200913/b4e1a8a3842aa360eecd7c54a5c83dac.jpg

    Sent from my...
  14. I've been curious about them for a while now. I...

    I've been curious about them for a while now. I used the engine flush and nothing gross came out, but this engine is most likely very healthy even with 220k+ on the clock. I added the Ceratech and...
  15. Figured I got enough free oil changes from...

    Figured I got enough free oil changes from FCPEuro to warrant this treatment.https://uploads.tapatalk-cdn.com/20200811/1a91a89cdb25d62b81db98970c682f47.jpg

    Sent from my Pixel 2 XL using Tapatalk
  16. Good observation! There is a little rubber pad...

    Good observation!

    There is a little rubber pad that sits between the front crossmember and the oil pad. You can see it in the above picture between the two frames. It effectively cleaned up that...
  17. Swapped over the ZHP front suspension parts. The...

    Swapped over the ZHP front suspension parts. The touring is now 1/4 ZHP. Time for an...
  18. Hmmmmm.... haven't updated this in a while. ...

    Hmmmmm.... haven't updated this in a while.

    E-fan conversion done. Also swapped over the ZHP shroud which has a little wider opening than the stock 325i shroud. I need to get some ZHP brackets so...
  19. Replaced MAF, fuel trims are normal again. Now...

    Replaced MAF, fuel trims are normal again.

    Now I'm 99% sure I need to attack the FCABs, and if I do that then I may as well swap my whole ZHP front suspension on...well that escalated quickly...
  20. Check engine light came on today. Previous owner...

    Check engine light came on today. Previous owner said it may be the MAF. I'll have to scan the codes when I get home. Unfortunately, my old ZHP MAF doesn't just bolt up. But I can exchange it with...
  21. This is my 2003 325iT auto, JapanRot over tan...

    This is my 2003 325iT auto, JapanRot over tan (ewww, but whatever). My first tan interior car, hopefully it'll grow on me.

    If you are new to my story, I will give a short background. I purchased a...
  22. This time is different, I promise. [emoji23] ...

    This time is different, I promise. [emoji23]

    Sent from my Pixel 2 XL using Tapatalk
  23. Corey's Electric Red 325iT. The Antiproject wagon.

    Just because the wife said no more working on cars that's not my race car. More details when I get to a PC. Here's a...
Results 1 to 23 of 23