I didn't even think of the DME and reverse switch. My guess is you'll need to re program the build options.
Type: Posts; User: wsmeyer
I didn't even think of the DME and reverse switch. My guess is you'll need to re program the build options.
Count me in!
Count me in!
You don't like yours anymore?
Just his wallet.
I always try to be responsible with advice to others but I don't always follow it myself either.
A couple of weeks ago, after a few beers and under the cover of darkness I topped of my neighbors...
Better check with the city on that plan. Would hate to see you get stuck with a bill for city workers to undue it.
I 2nd the steel plate idea. City shouldn't care because it won't hinder water...
You have a 5 speed in your ZHP?
Close, originally I also thought that function was solely dictated by position.
Look closely at the picture of the inside of the switch in the very first post. While doing the mod I noticed that...
You'll love those tires. I have them on our X5 as that is what we drive in the snow periodically.
Just like the last time, I don't drive the ZHP much so 3 of my 4 Pilot Super Sport's dried out and cracked long before I wore them out. The third wore through on the inside do to worn out FCAB.
...
If a valve breaks the engine usually seizes as there just isn't enough room in the combustion chamber at TDC for any piece of a valve. That being residue from a burned piece of plastic from a broken...
If the seal in the fuel pump on the output side is going it won't hold pressure in the line when it is off, and when you go to start the car it will take a split second to build up pressure. If it is...
I've got underdrive including the alternator and I don't notice any V dip even when operating the top at idle.
If it was me and I had to drive the car I'd put some oil on the back side of the belt. Usually this is a no-no because the oil will disintegrate the rubber but the heat will do it A LOT faster.
+1
The part that is left does not turn so it must be generating a lot of heat and I would expect the belt to snap at any moment. You need to replace that ASAP.
^^ That's the 325 sport model unit. I want the ZHP unit.
I might pick up one of these:
https://losangeles.craigslist.org/sgv/ele/6032563538.html
It's only 1024x768 but if it can focus close enough that might be, plus it's only $20. Spare monitor I...
The white thing is a visual presenter also referred to as an "elmo". It's normally used in presentations to project a document onto a screen but he's using it as a giant magnifier.
Ultimate SPORT button mod setup! Unfortunately not mine but I am definitely setting this up soon.
29455
Welcome. Redondo Beach here
What ever happened with the one across the street from you?
The telescopic nozzles are not electric, it's the water pressure that extends them and then when the inner tube is fully extended the water is released though the holes in the end.
Not the best...
IThey still pop the hood here in CA for a visual inspection. One of the things they look for is aftermarket intakes. I bought my ZHP new and was told I could add any of the BMWP parts right on to the...
I have a big bore TB. No regrets in buying it.