Search:

I did the exact same thing. The reset button doesn’t do a thing, but the monitor still works if you get a flat. I wish I knew of an easy way to get it working

I have no idea. I was surprised when it didn’t work on my car but it’s still nice to have the monitor even if I can’t reset it with the button

I have a 2005 ZHP and my reset doesn’t work either. Everything else does except the reset

Any luck installing the new module?

If you can, take some pictures of the install. I'd be curious to know what all goes into exchanging them.

Where did you buy the module? I wonder why some ZHPs seem to not have to correct one

I just looked at INPA and I'm showing the same as you BMW part #6765452 and coding index 12. I have an 05 ZHP and can not get the reset button to work....

What year is your ZHP?

I used a solid core wire, but it shouldn't matter At all

What kind of wire did you use?

That was my plan while I was working today, but I ran out of daylight. Next chance I get I'll do a continuity check.

And thank you all for the help! I'm determined to get this thing working. It...

Just an update, I took apart the button inside the car and verified that I was in the correct pin(#2). Everything looks fine there, so the next step is getting back in the DSC module

I get no response when pressing the button. It doesn't matter if I'm driving or parked or how long I hold it. It just doesn't seem to be making a connection.

[QUOTE=terraphantm;467405]I just had a thought - are you sure you have pin 2? Since the pins aren't labeled, I can imagine it's pretty easy to get them confused.

It is possible and that is the...

No the DSC module hasn't been replaced. The TPMS is functioning properly, just the reset button isn't working. I am able to reset using INPA. I'm not 100% sure I know what you mean by what coding...

Sure thing, it's an 05 330i ZHP. I used a solid core I believe 18 gauge speaker wire for the reset button.

I will test it with a meter and see what I can find.

Ok, so I have confirmed that the system works now after adding $251 to the VO. I can reset it using INPA, but the reset button in the car still does not work. I used a solid core wire instead of a...

Good to know and thanks for the response. I am working with a ZHP so I'm thinking it should work. I'll update when I add $251 to the VO

Awesome, thank you very much for checking on this. I will get that done and retest.

So I did this and it never set the sensor off. I was under the impression that pressing the button should give you a signal on the dash that the system reset even if you don't have a warning light.

Sounds good, thanks for the response. I used a section of speaker wire which is a solid copper core ~18 gauge. I completed the coding from the first post here "Description~String~Options (Default)...

Sorry to dig up an old post, but I have a couple of questions. What type of wire are most people using from the button to the DSC? Also, half of the pictures in the original post are now missing....