18x9.5 et35 should be doable with a 255 in the back and rolling/minor trimming if you're lowered. Front you'll need a spacer and more fender mods if you want to run square
Type: Posts; User: Taliben
18x9.5 et35 should be doable with a 255 in the back and rolling/minor trimming if you're lowered. Front you'll need a spacer and more fender mods if you want to run square
Hahaha that's a good idea, I'll do that! And the rear wheel specs are 18x10 et40 on a 255/35/18
I'm not at all worried about the outer clearance with the fender, I'm worried about the inner lip clearance on the strut/body because when I lower the car it's gonna gain some camber, which will...
My 4x4 game is strong today.
So on the rear should I run a small spacer considering that right now I have a very very small amount of clearance between the inner lip of the wheel and the body/wheel...
After Christmas I'm trying to buy some D2 Forged FMS-01s in 18x8.5 & 9 or 9.5. What ET should I run and can i fit these junts on stock suspension with no fenders rolled or pulled?
Sent from my...