An update...
The previous owner of my ZHP had a square setup on the car, so its 255 on all 4 corners. Turns out this was too much for the 128i. Initial testing at city speeds didn't reveal any...
Type: Posts; User: Stewbie
An update...
The previous owner of my ZHP had a square setup on the car, so its 255 on all 4 corners. Turns out this was too much for the 128i. Initial testing at city speeds didn't reveal any...
Damn these look sharp on my 1 series...
http://i1254.photobucket.com/albums/hh619/Stewbie2000/2008%20BMW%20128i/DSC_0130_zpsjgkjutuo.jpg
---
...
Imola. Good choice. Congrats!
Sent from my XT1064 using Tapatalk
Thanks! I was in a 2003 Corolla, so I never stood a chance but it was awesome that the starter let me try.
Maybe if Scott was in the Corolla and I was in the Jaguar... :)
Sent from my XT1064...
Her reaction is hilarious...
https://www.youtube.com/watch?v=LylPdhO4mNE
Indy Lights and Porsche Cup Canada driver Scott Hargrove was giving rides in a Jaguar F-Type R. I threw down a...
I also have non-folding rear seat with no pass through. The rear seat bottom is easy to remove, but I've had no luck removing the rear seat back. If the internet is right, you just need to tug in...
My owner's manual doesn't list the cooling system capacity. I see ECS Tuning's refresh kits come with 1 Gallon of concentrate. Once mixed with 1 Gallon of distilled water that provides coverage for...
Best mod ever!
Sent from my XT1064 using Tapatalk
Where did you get the new OEMs from?
Sent from my XT1064 using Tapatalk
I was lucky when I did my VCG and only had one little piece that played hide and seek with me. :)
Sent from my XT1064 using Tapatalk
Any pics?
My ZHP is also a sedan without a folding rear seat. No pass-thru either, just the fold down armrest. I want to remove the rear seat back. Is there just two clips like the seat bottom?...
Strut tower reinforcement plates installed. Surprisingly easy job. Turns out I had to disconnect the sway bay link as the control arm wouldn't drop low enough to slip the plate on top if I didn't. ...
I'm planning on installing strut tower reinforcement plates (like these: http://www.turnermotorsport.com/p-323-e46-strut-tower-reinforcement-plates-pair.aspx) and have a few questions.
1. All my...
I just slip a wet soapy microfibre cloth in the gap and use it like floss. Need to reach one hand thru the large gap to grab the other end of the cloth. They are easier to clean if you take the...
That was a long time ago, and the car has mostly been parked for over a year now due to my back problems (manual, so clutching irritates things), so I don't recall what the outcome was.
Sent...
Welcome from a fellow west coast canuck!
Sent from my XT1064 using Tapatalk
FYI - In my Google searches I came across the following in the comments section of Pelican Parts E30 sunroof DIY. Though I'd leave it here in case it helps anyone.
Comments: I have a 325i 2004...
While sleeping on it, it occurred to me that I had the mechanism in the tilt up position to get the glass off. I lowered it and the yellow-tip coil retracted towards the front of the car. I was...
Thanks for your post. I've inspected the part you referenced. Both are fully intact. One is a little worn on the edge that contacts the slide driver, but nothing serious.
Here is another photo...
Okay. Figured out how to remove the "wiper" which gave me enough room to get at the bolts for the rear shade slider. Then I was able to remove the shade. The driver and passenger side sliders are...
For shits and giggles I decided to pull off the sunroof and check the shade slider components. Since I've owned the car, the shade has never gone all the way forward. Here's what I found:
This...
Maybe u won't notice a difference but neither will you experience the slow loss of performance over time as the vanos slowly fails.
My Indy quoted $225 to do the VCG (did it myself using a...
I took some pictures and posted a DIY when I replaced mine.
Check Turner Motorsports website. They have a guide on the pros and cons of various brands of pads.
You know you're a hardcore enthusiast when you've got not 1, nor 2, but 3 (!) spare roundels. :)